This section presents the requirements for programs in:

• Industrial Design B.I.D.
• Minor in Design

Regulations

The regulations presented in this section apply to all students in the Bachelor of Industrial Design program.

In addition to the requirements presented here, students must satisfy the University regulations common to all undergraduate students including the process of Academic Performance Evaluation (consult the Academic Regulations of the University section of this Calendar).

Year Status and General Prerequisites

Prerequisites

The following broad course prerequisites specify requirements for access to upper year project courses:

• Registration in IDES 2300 Projects IIA normally requires successful completion of IDES 1001, IDES 1301 and must not be deficient in any more than one of the other first-year courses.
• Registration in IDES 4310 [1.5] Capstone Project normally requires successful completion of all third-year course requirements.

Academic Performance Evaluation for Bachelor of Industrial Design

1. Students in the Bachelor of Industrial Design degree are assessed at each Academic Performance Evaluation using their Overall CGPA and the Industrial Design Core courses. (The Industrial Design program does not distinguish a set of courses forming a Major).

The following evaluation criteria apply:

1. students are subject to an evaluation at the end of the winter term if they have completed 4.0 credits since admission or since the preceding evaluation;
2. in addition, students will receive an evaluation of their Industrial Design Core courses at the end of each Winter term as long as they have completed a Core course in the preceding summer, fall or winter terms.

1. Good Standing - Good Standing requires a grade of C- or better in each of the Industrial Design Core courses as well as an Overall CGPA at or above the minimum given in Table 1 of Section 3.2.7.
2. Academic Warning - Students who are not assigned the status Good Standing (GS), Continue in Alternate (CA) or Dismissed from Program (DP) will be on Academic Warning. The following conditions apply:
   1. a student who is on Academic Warning due to a grade less than C- in a Core course, but with an Overall CGPA high enough for Good Standing will be given permission to repeat this Core course and must achieve a grade of C- or better before the next evaluation.
   2. a student who is on Academic Warning due to an Overall CGPA less than the minimum required for Good Standing, and who also has a grade less than C- in a Core course must raise both the Overall CGPA and pass the Core course with a grade of C- or better before the next evaluation. This student must first raise his or her Overall CGPA to a level sufficient to achieve Good Standing, if an evaluation were made, before permission will be given to re-register in the Core course.
3. Continue in Alternate or Dismissed from Program - Students satisfying any of the following conditions must leave the Industrial Design program with the status Continue in Alternate (CA) or Dismissed from Program (DP):
   1. have an Overall CGPA that is less than 1.00,
   2. have failed to achieve a Good Standing assessment at the next Academic Performance Evaluation while on Academic Warning,
   3. have failed to satisfy any additional course requirements received on admission,
   4. have received a grade of less than C- in the same Core course twice,
   5. have not completed the program within seven years.

Co-operative Education

For more information about how to apply for the Co-op program and how the Co-op program works please visit the Co-op website.

All students participating in the Co-op program are governed by the Undergraduate Co-operative Education Policy.

Undergraduate Co-operative Education Policy

Admission Requirements

Students can apply to co-op in one of two ways; directly from high school or after beginning a degree program at Carleton.

If a student is admitted to co-op from high school, their grades will be reviewed two terms to one year prior to their first work term to ensure they continue to meet the academic requirements after their 1st or 2nd year of study. The time at which evaluation takes place depends on the program of study. Students will automatically be notified via their Carleton email account if they are permitted to continue.

Students not admitted to Carleton University with the co-op option on their degree can apply for admission via the co-operative education program website. To view application deadlines, visit carleton.ca/co-op.

Admission to the co-op option is based on the completion of 5.0 or more credits at Carleton University, the CGPA requirement for the students' academic program as well as any course prerequisites. The articulated CGPA for each program is the normal standard for assessment. Please see the specific degree program sections for the unique admission and continuation requirements for each academic program.

English Language Proficiency

Students admitted to Carleton based on CAEL, IELTS or TOEFL assessments and who are required to take an ESL course must take and pass the Oral Proficiency in Communicative Settings (OPECS) Test. The test must be taken before being permitted to register in COOP 1000. Admission to the co-op program can be confirmed with a minimum score of 4+.

Participation Requirements

COOP 1000

Once a student has been given admission or continuation confirmation to the co-op option s/he must complete and pass COOP 1000 (a mandatory online 0.0 credit course). Students will have access to this course a minimum of two terms prior to their first work term and will be notified when to register.

Communication with the Co-op Office

Students must maintain contact with the co-op office during their job search and while on a work term. All email communication will be conducted via the students' Carleton email account.

Employment

Although every effort is made to ensure a sufficient number of job postings for all students enrolled in the co-op option of their degree program, no guarantee of employment can be made. Carleton's co-op program operates a competitive job search process and is dependent upon current market conditions. Academic performance, skills, motivation, maturity, attitude and potential will determine whether a student is offered a job. It is the student's responsibility to actively conduct a  job search in addition to participation in the job search process operated by the co-op office. Once a student accepts a co-op job offer (verbally or written), his/her job search will end and access to co-op jobs will be removed for that term. Students that do not successfully obtain a co-op work term are expected to continue with their academic studies. The summer term is the exception to this rule. Students should also note that hiring priority is given to Canadian citizens for co-op positions in the Federal Government of Canada.

Registering in Co-op Courses

Students will be registered in a Co-op Work Term course while at work. The number of Co-op Work Term courses that a student is registered in is dependent upon the number of four-month work terms that a student accepts.

While on a co-op work term students may take a maximum of 0.5 credit throughout each four-month co-op work term. Courses must be scheduled outside of regular working hours.

Students must be registered as full-time before they begin their co-op job search (2.0 credits). All co-op work terms must be completed before the beginning of the final academic term. Students may not finish their degree on a co-op work term.

Work Term Assessment and Evaluation

To obtain a Satisfactory grade for the co-op work term students must have:

1. A satisfactory work term evaluation by the co-op employer;
2. A satisfactory grade on the work term report.

Students must submit a work term report at the completion of each four-month work term. Reports are due on the 16th of April, August, and December and students are notified of due dates through their Carleton email account.

Workplace performance will be assessed by the workplace supervisor. Should a student receive an unsatisfactory rating from their co-op employer, an investigation by the co-op program manager will be undertaken. An unsatisfactory employer evaluation does not preclude a student from achieving an overall satisfactory rating for the work term.

Graduation with the Co-op Designation

In order to graduate with the co-op designation, students must satisfy all requirements for their degree program in addition to the requirements according to each co-op program (i.e. successful completion of three or four work terms).

Note: Participation in the co-op option will add up to one additional year for a student to complete their degree program.

Voluntary Withdrawal from the Co-op Option

Students may withdraw from the co-op option of their degree program during a study term ONLY. Students at work may not withdraw from the work term or the co-op option until s/he has completed the requirements of the work term.

Students are eligible to continue in their regular academic program provided that they meet the academic standards required for continuation.

Involuntary or Required Withdrawal from the Co-op Option

Students may be required to withdraw from the co-op option of their degree program for one or any of the following reasons:

1. Failure to achieve a grade of SAT in COOP 1000
2. Failure to pay all co-op related fees
3. Failure to actively participate in the job search process
4. Failure to attend all interviews for positions to which the student has applied
5. Declining more than one job offer during the job search process
6. Continuing a job search after accepting a co-op position
7. Dismissal from a work term by the co-op employer
8. Leaving a work term without approval by the Co-op manager
9. Receipt of an unsatisfactory work term evaluation
10. Submission of an unsatisfactory work term report

Standing and Appeals

The Co-op and Career Services office administers the regulations and procedures that are applicable to all co-op program options. All instances of a student's failure during a work term or other issues directly related to their participation in the co-op option will be reported to the academic department.

Any decision made by the Co-op and Career Services office can be appealed via the normal appeal process within the University.

International Students

All International Students are required to possess a Co-op Work Permit issued by Immigration, Refugees and Citizenship Canada before they can begin working. It is illegal to work in Canada without the proper authorization. Students will be provided with a letter of support to accompany their application. Students must submit their application for their permit before being permitted to view and apply for jobs on the Co-op Services database. Confirmation of a position will not be approved until a student can confirm they have received their permit. Students are advised to discuss the application process and requirements with the International Student Services Office.

Bachelor of Industrial Design: Co-op Admission and Continuation Requirements 

• Maintain full-time status in each study term (2.0 credits);
• Be eligible to work in Canada (for off-campus work)
• Have successfully completed COOP 1000 [0.0]

In addition to:

1. Registered as a full-time student in the Industrial Design program
2. Obtained a CGPA of 8.00 or higher in industrial design core courses and an overall CGPA of 6.50 or higher

Students in the Bachelor of Industrial Design must complete three (3) work terms to obtain the co-op designation.

Co-op Work Term Course: IDES 3999
Work-Study Pattern:

Legend
S: Study
W: Work
O: Optional
* indicates recommended work study pattern
** student finds own employer for this work-term.

Admissions Information

Admission Requirements are for the 2020-21 year only, and are based on the Ontario High School System. Holding the minimum admission requirements only establishes eligibility for consideration. The cut-off averages for admission may be considerably higher than the minimum. See also the General Admission and Procedures section of this Calendar. An overall average of at least 70% is normally required to be considered for admission. Some programs may also require specific course prerequisites and prerequisite averages and/or supplementary admission portfolios. Higher averages are required for admission to programs for which the demand for places by qualified applicants exceeds the number of places available. The overall average required for admission is determined each year on a program by program basis. Consult admissions.carleton.ca for further details.

Note: Courses listed as recommended are not mandatory for admission. Students who do not follow the recommendations will not be disadvantaged in the admission process.

Degree

• Bachelor of Industrial Design (B.I.D.)

Admission Requirements

First Year

The Ontario Secondary School Diploma (OSSD) or equivalent including a minimum of six 4U or M courses. The six 4U or M courses must include Advanced Functions and Physics. Calculus and Vectors, Design Technology and Visual Arts are strongly recommended. Equivalent courses may be substituted between the old and new Ontario mathematics curriculum.

Note: candidates must present a portfolio of any kind of work that could demonstrate creativity and aptitude for the study of industrial design. Attending an information session at the School is recommended.

Advanced Standing

Applications for admission to second or subsequent years will be assessed on their merits and on space availability in the program. Advanced standing will be granted only for those courses that are determined to be appropriate and is subject to space availability.

Co-op Option
 

Direct Admission to the First Year of the Co-op Option
Applicants must:

1. meet the required overall admission cut-off average and prerequisite course average. These averages may be higher than the stated minimum requirements;
2. be registered as a full-time student in the Industrial Design program;
3. be eligible for work in Canada (for off-campus work placements).

Meeting the above requirements only establishes eligibility for admission to the program. The prevailing job market may limit enrolment in the co-op option.

Note: continuation requirements for students previously admitted to the co-op option and admission requirements for the co-op option after beginning the program are described in the Co-operative Education Regulations section of this Calendar.