This is an archived copy of the 2016-2017 calendar. To access the most recent version of the calendar, please visit http://calendar.carleton.ca.

View PDF

Industrial Design

School of Industrial Design
(Faculty of Engineering and Design)
3470 Mackenzie Bldg.
613-520 5672
http://id.carleton.ca

This section presents the requirements for programs in:

Graduation Requirements

In addition to the requirements listed below, students must satisfy the University regulations, including the process of Academic Performance Evaluation (see the Academic Regulations of the University section of this Calendar), and the Academic Regulations for the Bachelor of Industrial Design .

Students should consult the School when planning their program and selecting courses.

Academic Performance Evaluation

Students in Industrial Design are subject to the standard Academic Performance Evaluation process with the following additions and amendments:

  1. The Industrial Design program does not define a Major CGPA. Students are assessed at each Academic Performance Evaluation using their Overall CGPA and the Core minimum defined in 2 below.
  2. The courses in the Industrial Design Core are as follows:
    Industrial Design Core
    IDES 1300 [0.5]
    Projects IA
    IDES 1301 [0.5]
    Projects IB
    IDES 2300 [0.5]
    Projects IIA
    IDES 2302 [0.5]
    Projects IIB
    IDES 3300 [1.0]
    Projects IIIA
    IDES 3302 [0.5]
    Projects IIIB
    IDES 4310 [1.5]
    Major Project
    IDES 4301 [0.5]
    Minor Projects A
    IDES 4302 [0.5]
    Minor Projects B
    Good Standing requires a grade of C- or better in each course of the Industrial Design Core.
  3. Students in Industrial Design are either in Good Standing or on Academic Warning. Students who satisfy the conditions for Suspension at an Academic Performance Evaluation must leave the Industrial Design program with the status Ineligible to Return (ITR).
  4. For more information regarding academic performance evaluation in the B.I.D. program, consult the Academic Regulations of the University , and Academic Regulations for the Bachelor of Industrial Design Degree sections of this Calendar.

Prerequisites

The following broad course prerequisites specify requirements for access to upper year project courses.

Registration in IDES 2300 Projects IIA normally requires successful completion of IDES 1001, IDES 1301 and must not be deficient in any more than one of the other first-year courses.

Registration in IDES 3300 [1.0] Projects IIIA normally requires successful completion of all first-year and second-year course requirements.

Registration in IDES 4310 [1.5] Major Project normally requires successful completion of all third-year course requirements.

Program Requirements

Industrial Design
B.I.D. (20.0 credits)

First Year
1.  5.0 credits in:5.0
IDES 1000 [0.5]
Theory and History of Design
IDES 1001 [0.5]
Industrial Design Analysis
IDES 1300 [0.5]
Projects IA
IDES 1301 [0.5]
Projects IB
ECON 1000 [1.0]
Introduction to Economics
MATH 1107 [0.5]
Linear Algebra I
PSYC 1001 [0.5]
Introduction to Psychology I
PSYC 1002 [0.5]
Introduction to Psychology II
PHYS 1007 [0.5]
Elementary University Physics I
Second Year
2.  4.0 credits in:4.0
IDES 2101 [0.5]
Series and Mass Production Technology A
IDES 2102 [0.5]
Series and Mass Production Technology B
IDES 2105 [0.5]
Computer Applications
IDES 2205 [0.5]
Sensory Aspects of Design
IDES 2300 [0.5]
Projects IIA
IDES 2302 [0.5]
Projects IIB
IDES 2600 [0.5]
Ergonomics for Product Design
PSYC 3702 [0.5]
Perception
3.  0.5 credit in:0.5
Architecture, Art History, Business, Computer Science, Engineering, Mathematics, Physics, Psychology, or Technology, Society, Environment Studies
4.  0.5 credit in free electives0.5
Third Year
5.  3.0 credits in:3.0
IDES 3300 [1.0]
Projects IIIA
IDES 3302 [0.5]
Projects IIIB
IDES 3502 [0.5]
Contextual Nature of Products
IDES 3503 [0.5]
Professional Practice
IDES 3601 [0.5]
Industrial Design and the User
6.  0.5 credit in:0.5
BUSI 2204 [0.5]
Basic Marketing
7.  1.0 credit in electives at the 2000-level or above1.0
8.  0.5 credit in:0.5
IDES 3104 [0.5]
Exhibition Design
IDES 3105 [0.5]
Visual Communication and Package Design
IDES 3106 [0.5]
Advanced Computer Applications
IDES 3202 [0.5]
Adv. Studies in Form and Colour
IDES 3305 [0.5]
Special Studies
IDES 3306 [0.5]
Special Studies
Fourth Year
9.  3.5 credits in:3.5
IDES 4001 [0.5]
Industrial Design Seminar
IDES 4301 [0.5]
Minor Projects A
IDES 4302 [0.5]
Minor Projects B
IDES 4310 [1.5]
Major Project
IDES 4400 [0.5]
Internship Field Report
10.  1.5 credits in approved electives at the 3000-level or above1.5
Total Credits20.0

Notes:

  1. Fourth-year students are required to register in IDES 4301, IDES 4302 and IDES 4310 in the same academic year.
  2. One successfully completed Industrial Design Co-op work term between the third and fourth year of study is equivalent to IDES 4400.
  3. The electives under Item 10 above must be chosen in consultation with the School on the following principles:
    1. the electives chosen should serve to deepen the student's understanding of fields related to Industrial Design or disciplines that are relevant for industrial designers;
    2. the electives chosen should preferably be related to the Industrial Design projects and provide basic and/or actual information for these projects.

Minor in Design (4.0 credits)

This minor is open to all undergraduate degree students not in the Industrial Design program.
Only students pursuing undergraduate programs requiring at least 20.0 credits to graduate and who have completed at least 4.0 credits toward their degrees with a minimum overall CGPA of 7.00 may be admitted to the Minor in Design.

1.  1.5 credits in:1.5
IDES 1000 [0.5]
Theory and History of Design
IDES 1001 [0.5]
Industrial Design Analysis
IDES 2205 [0.5]
Sensory Aspects of Design
2.  2.5 credits from:2.5
IDES 2600 [0.5]
Ergonomics for Product Design
IDES 3104 [0.5]
Exhibition Design
IDES 3105 [0.5]
Visual Communication and Package Design
IDES 3305 [0.5]
Special Studies
IDES 3306 [0.5]
Special Studies
IDES 3502 [0.5]
Contextual Nature of Products
IDES 3601 [0.5]
Industrial Design and the User
IDES 4001 [0.5]
Industrial Design Seminar
IDES 4101 [0.5]
Adv. Studies in Manufacturing
IDES 4200 [0.5]
Form Organization
IDES 4305 [0.5]
Special Studies
IDES 4306 [0.5]
Special Studies
3. The remaining requirements of the major discipline(s) and degree must be satisified.
Total Credits4.0

School of Industrial Design

Faculty of Engineering and Design


IDES 1000 [0.5 credit]
Theory and History of Design

The theoretical and historical background of industrial design and design; disciplinary foundations and interdisciplinary connections; methodological aspects and economic and social contexts; contemporary scenarios in design; technological innovation and manufacturing processes.
Also listed as ARCH 2006.
Lectures three hours a week.

IDES 1001 [0.5 credit]
Industrial Design Analysis

Principles of comparative product design analysis covering marketing and sales, manufacturing techniques and materials, ambiance and qualities of the object/context relationship, and design analysis from the perspective of the designer, the maker and the user.
Also listed as ARCH 2101.
Prerequisite(s): IDES 1000 (ARCH 2006).
Lectures three hours a week.

IDES 1300 [0.5 credit]
Projects IA

An introduction to the skills and processes of industrial design including drawing and sketching as an aid to design, basics of line, shape, ideation, and visualization, product drawing, presentation techniques, basic model making, studio equipment and practices, introduction to the design process.
Prerequisite(s): IDES 1000 (may be taken concurrently).
Studio and lectures six hours a week.

IDES 1301 [0.5 credit]
Projects IB

Aspects of industrial design theory and practice, specifically those dealing with principles of product development, fundamentals of form and colour and case studies. Students will explore the design process with emphasis on creative problem-solving techniques and visual communication in design.
Prerequisite(s): IDES 1300.
Studio and lectures six hours a week.

IDES 2101 [0.5 credit]
Series and Mass Production Technology A

Transformation techniques applied to manufacturing materials. Part-design requirements and cost factors for manufacturing processes. Influences and role of assembly, finishing, production tooling, and costing.
Prerequisite(s): IDES 1001, IDES 1301.
Lecture and tutorials three hours a week, laboratory three hours a week.

IDES 2102 [0.5 credit]
Series and Mass Production Technology B

Continuation of IDES 2101. Transformation techniques applied to manufacturing materials. Part-design requirements and cost factors for manufacturing processes. The influences and role of assembly, finishing, production tooling, costing are addressed.
Prerequisite(s): IDES 2101 or permission of the School of Industrial Design.
Lecture and tutorials three hours a week, laboratory three hours a week.

IDES 2105 [0.5 credit]
Computer Applications

Provides industrial design students with a working knowledge of design related 3D computer applications, as well as graphic manipulation and illustration software. Labs and projects are oriented towards building a foundation in software and group work skills for studio courses.
Prerequisite(s): IDES 1301.
Lecture and tutorials three hours a week.

IDES 2205 [0.5 credit]
Sensory Aspects of Design

An exploration of multi-sensory qualities derived from and designed into products to optimize sensory experiences. Visual, tactile, auditory, and other related design elements and principles that contribute to the product multi-sensory characteristics while adding meaning and emotional value.
Precludes additional credit for IDES 2203 (no longer offered).
Prerequisite(s): IDES 1001 or permission of the School of Industrial Design.
Lectures and tutorials three hours a week.

IDES 2300 [0.5 credit]
Projects IIA

Principles of drawing and sketching used in the design process. Project topics include: sketching as a tool for problem definition; idea exploration and form development; rendering techniques and the communication of design concepts; basic physical modeling techniques as a complement to sketching and drawing.
Prerequisite(s): IDES 1001 and IDES 1301, or permission of the School of Industrial Design.
Studio and lectures six hours a week.

IDES 2302 [0.5 credit]
Projects IIB

Introduction to the design principles associated with adapting products to an existing product semantic. Topics covered: principles of design, product semantics, design analysis, design synthesis, design evaluation, and modeling techniques. The design project(s) explore some or all of the design principles covered in the lectures.
Prerequisite(s): IDES 2300 or permission of the School of Industrial Design.
Studio and lectures six hours a week.

IDES 2600 [0.5 credit]
Ergonomics for Product Design

Physical, biomechanical, environmental and cognitive issues. Displays, controls, workstations, tools and software interfaces are examined from scientific and practical perspectives.
Prerequisite(s): PSYC 1001 and PSYC 1002, or PSYC 1000.
Lectures and discussion three hours a week.

IDES 3104 [0.5 credit]
Exhibition Design

The field of exhibition design is explored through lectures and case studies. Students undertake a preliminary exercise in display and exhibition design prior to the development and implementation of an exhibition; this normally involves the design of the School of Industrial Design's Annual Graduation Exhibition.
Prerequisite(s): IDES 2205 and IDES 2302 or permission of the School of Industrial Design.
Lectures and tutorials three hours a week.

IDES 3105 [0.5 credit]
Visual Communication and Package Design

A survey of visual communication and package design principles relevant to industrial designers. Product/brand definition and corporate identity through package design.
Prerequisite(s): IDES 2205 and IDES 2302 or permission of the School of Industrial Design.
Lectures and tutorials three hours a week.

IDES 3106 [0.5 credit]
Advanced Computer Applications

Examination of complex product geometry utilizing 3D computer applications. Topics include spline, surface and solids construction, surface verification tools, and rendering tools and techniques. Workflow, robust design, reverse design techniques and 3D printing will be explored through exercises.
Prerequisite(s): IDES 2105.
Lecture and tutorials three hours a week.

IDES 3107 [0.5 credit]
Design and Sustainability

Sustainability and the industrial designer’s role in creating more environmentally and socially responsible products. Imperatives and drivers for integrating sustainability into product design. Sustainable design strategies and tools, business case for sustainable design, and case studies.
Prerequisite(s): IDES 1001 and IDES 2302 or permission of the School of Industrial Design.
Lectures and tutorials three hours a week.

IDES 3202 [0.5 credit]
Adv. Studies in Form and Colour

Students may continue the research and study encountered in IDES 2205, IDES 2300 and IDES 2302 by doing advanced research in the phenomena of form and/or colour and their communicative functions in products. Directed Study.
Prerequisite(s): IDES 2205 and IDES 2302 or permission of the School of Industrial Design.
Lecture and tutorials three hours a week.

IDES 3300 [1.0 credit]
Projects IIIA

Introduction to the design principles associated with the evaluation and re-design of an existing product. Topics include: user/machine relationship, component packaging, and manufacturability. The design project(s) explore some or all of the design principles covered in the lectures.
Prerequisite(s): IDES 2205 and IDES 2302 or permission of the School of Industrial Design.
Studio and lectures twelve hours a week.

IDES 3302 [0.5 credit]
Projects IIIB

This course is an introduction to the principles of innovation as found in industrial design. Topics to be covered include: invention, innovation, entrepreneurship, basic mechanisms. The design project(s) explore some or all of the design principles covered in the lectures.
Precludes additional credit for IDES 3301 (no longer offered).
Prerequisite(s): IDES 3300 or permission of the School of Industrial Design.
Studio and lectures six hours a week.

IDES 3305 [0.5 credit]
Special Studies

Special Industrial Design Studies deal with specific projects, which may differ from year to year depending on the availability of specialists in a particular field or study opportunities as they present themselves.
Prerequisite(s): IDES 2302 or permission of the School of Industrial Design.
Lectures, tutorials, laboratory and studio three hours a week or equivalent.

IDES 3306 [0.5 credit]
Special Studies

Special Industrial Design Studies deal with specific projects, which may differ from year to year depending on the availability of specialists in a particular field or study opportunities as they present themselves.
Prerequisite(s): IDES 2302 or permission of the School of Industrial Design.
Lectures, tutorials, laboratory and studio three hours a week or equivalent.

IDES 3502 [0.5 credit]
Contextual Nature of Products

Cultural subjects which have an influence on contemporary industrial design. The perspective of the course is anthropological: the context and cultural relevance of industrial design.
Prerequisite(s): IDES 1000 (ARCH 2006).
Lectures and tutorials three hours a week.

IDES 3503 [0.5 credit]
Professional Practice

The organizational aspects of consultancies and client responsibilities within the framework of corporate management. Topics include: the form of contracts for consultancy, determination of fees, legal implications, patents and copyrights. Guest lecturers.
Prerequisite(s): IDES 3300 or permission of the School of Industrial Design.
Lectures and discussion three hours a week.

IDES 3601 [0.5 credit]
Industrial Design and the User

Design methodology and the value of scientific methods for data collection and decision-making. Techniques such as interviewing, focus groups, usability testing, brainstorming, and value analysis will be covered. Teamwork techniques and values are considered.
Prerequisite(s): IDES 2600.
Lectures three hours a week, laboratory three hours a week.

IDES 3999 [0.0 credit]
Co-operative Work Term


IDES 4001 [0.5 credit]
Industrial Design Seminar

Topics vary yearly and address key contemporary industrial design issues. There is a focus on writing, discussion, and debate. Students organize a seminar with design professionals and other community experts including student and professional presentations, interaction, and discussion.
Prerequisite(s): IDES 3302 or permission of the School of Industrial Design.
Seminar three hours a week.

IDES 4101 [0.5 credit]
Adv. Studies in Manufacturing

Directed study in the field of manufacturing, centred on such topics as: cost analysis, new materials and processes, computer aided manufacturing, numerically controlled machining, machining of moulds, etc.
Prerequisite(s): IDES 2101 and IDES 2102.

IDES 4200 [0.5 credit]
Form Organization

Using form organization as a tool to design, the definition and prescription of monolithic solids by means of an abstract system; making and verifying materialized approximations of such solids.
Prerequisite(s): IDES 2300 and IDES 2302 or permission of the School of Industrial Design.
Lectures, tutorials and laboratory six hours a week.

IDES 4301 [0.5 credit]
Minor Projects A

Enables students to demonstrate through a series of short projects their versatility in product design or in complementary design fields such as communication, graphic design or design experiments. Emphasis is on time management and the ability to work independently on assigned projects.
Prerequisite(s): IDES 3302 or permission of the School of Industrial Design.
Studio and lectures six hours a week.

IDES 4302 [0.5 credit]
Minor Projects B

The application of required skills and team work in a comprehensive design project. The subject matter deals with broad issues in design.
Prerequisite(s): IDES 3302 or permission of the School of Industrial Design.
Studio and lectures six hours a week.

IDES 4305 [0.5 credit]
Special Studies

Like the third-year Special Industrial Design Studies, those of fourth year deal with specific projects, which may differ each year depending on the availability of specialists among the faculty of the School of Industrial Design or on particular opportunities as they present themselves.
Prerequisite(s): IDES 3302 or permission of the School of Industrial Design.
Lectures, tutorials, laboratory and studio three hours a week or equivalent.

IDES 4306 [0.5 credit]
Special Studies

Like the third-year Special Industrial Design Studies, those of fourth year deal with specific projects, which may differ each year depending on the availability of specialists among the faculty of the School of Industrial Design or on particular opportunities as they present themselves.
Prerequisite(s): IDES 3302 or permission of the School of Industrial Design.
Lectures, tutorials, laboratory and studio three hours a week or equivalent.

IDES 4310 [1.5 credit]
Major Project

Application of design principles in a comprehensive design project. Problem area chosen should be product oriented and of sufficient complexity. Normally undertaken in consultation with off-campus organizations and industry; supervised by faculty members.
Precludes additional credit for IDES 4300 (no longer offered).
Prerequisite(s): IDES 3302 or permission of the School of Industrial Design.
Studio and lectures six hours a week in Fall and twelve hours a week in Winter.

IDES 4400 [0.5 credit]
Internship Field Report

Work experience related to industrial design. Following the internship period (12 weeks minimum), a comprehensive report describing observations and insights must be submitted by the end of the fourth week of the fall term. Graded Sat or Uns.
Prerequisite(s): IDES 3300 or permission of the School of Industrial Design.
Tutorial hours arranged.

Summer session: some of the courses listed in this Calendar are offered during the summer. Hours and scheduling for summer session courses will differ significantly from those reported in the fall/winter Calendar. To determine the scheduling and hours for summer session classes, consult the class schedule at central.carleton.ca

Not all courses listed are offered in a given year. For an up-to-date statement of course offerings for the current session and to determine the term of offering, consult the class schedule at central.carleton.ca

May 18, 2017 04:47 PM