Ottawa-Carleton Institute for Mechanical and Aerospace Engineering
Minto 3090
613-520-5659
http://ocimae.ca
This section presents the requirements for programs in:
- M.A. Sc. Aerospace Engineering
- M.A.Sc. Materials Engineering
- M.A.Sc. Mechanical Engineering
- M. Eng. Aerospace
- M. Eng. Materials
- M. Eng. Mechanical
- Ph.D. Aerospace Engineering
- Ph.D. Mechanical Engineering
Program Requirements
Students are expected to complete the master's program within the maximum limits outlined in the Section 13.2 of the General Regulations section of this Calendar.
The requirements for course work are specified in terms of credits: one credit is one hour/week for one term (thirteen weeks).
M.A. Sc. Aerospace Engineering (5.0 credits)
M.A.Sc. Materials Engineering (5.0 credits)
M.A.Sc. Mechanical Engineering (5.0 credits)
| Requirements: | ||
| 1. 2.5 credits in courses offered by the OCIMAE. | 2.5 | |
| 2. Participation in the Mechanical and Aerospace Engineering seminar series | ||
| 3. 2.5 credits in: | 2.5 | |
MECH 5909 [2.5] | M.A.Sc. Thesis | |
| Total Credits | 5.0 | |
M. Eng. Aerospace (5.0 credits)
| Requirements: | ||
| 1. 1.5 credits from the Aerospace field listed | 1.5 | |
| 2. 3.5 credits from the Aerospace, Materials and Mechanical field and/or the Aerospace and Mechanical field listed | 3.5 | |
| Total Credits | 5.0 | |
| Requirements by Project (Independent Study) (5.0 credits) | ||
| 1. 1.5 credits in: | 1.5 | |
MECH 5908 [1.5] | Independent Engineering Study | |
| 2. 1.5 credits from the Aerospace field listed | 1.5 | |
| 3. 2.0 credits from any graduate level course offered by the OCIMAE | 2.0 | |
| Total Credits | 5.0 | |
M. Eng. Materials (5.0 credits)
| Requirements: | ||
| 1. 1.5 credits from the Materials field listed | 1.5 | |
| 2. 2.5 credits from the Aerospace, Materials and Mechanical field listed | 2.5 | |
| 3. 1.0 credits from any graduate level course offered by the OCIMAE | 1.0 | |
| Total Credits | 5.0 | |
| Requirements by Project (Independent Study) (5.0 credits) | ||
| 1. 1.5 credits in: | 1.5 | |
MECH 5908 [1.5] | Independent Engineering Study | |
| 2. 1.5 credits from the Materials field listed | 1.5 | |
| 3. 2.0 credits from any graduate level course offered by the OCIMAE | 2.0 | |
| Total Credits | 5.0 | |
M. Eng. Mechanical (5.0 credits)
| Requirements: | ||
| 1. 1.5 credits from the Mechanical field listed | 1.5 | |
| 2. 3.5 credits from the Aerospace, Materials and Mechanical field and/or the Aerospace and Mechanical field listed | 3.5 | |
| Total Credits | 5.0 | |
| Requirements by Project (Independent Study) (5.0 credits) | ||
| 1. 1.5 credits in: | 1.5 | |
MECH 5908 [1.5] | Independent Engineering Study | |
| 2. 1.5 credits from the Mechanical field listed | 1.5 | |
| 3. 2.0 credits from any graduate level course offered by the OCIMAE | 2.0 | |
| Total Credits | 5.0 | |
Ph.D. Aerospace Engineering (10.0 credits)
Ph.D. Mechanical Engineering (10.0 credits)
| Requirements (from the master's degree): | ||
| (from the master's degree) | ||
| 1. 1.5 credits in courses | 1.5 | |
| 2. Participation in the Mechanical and Aerospace Engineering seminar series | ||
| 3. Successful completion of the comprehensive examination according to section 9.4 and 9.5 of the General Regulations section of this Calendar | ||
| 4. 8.5 credits in thesis. | 8.5 | |
MECH 6909 [8.5] | Ph.D. Thesis | |
| Total Credits | 10.0 | |
Graduate Courses
In addition, graduate courses offered by departments in other disciplines may be taken for credit with approval by the department in which the student is registered.
Not all of the following courses are offered in a given year. Consult the Ottawa-Carleton Joint Institute for Mechanical and Aerospace Engineering (OCIMAE) website for course offerings.
The following codes identify the department offering the course:
- 'MECH' Department of Mechanical and Aerospace Engineering, Carleton University
- 'MAAJ' Department of Mechanical Engineering, University of Ottawa
| CARLETON UNIVERSITY | ||
| Aerospace | ||
| MECH 5100 (MCG 5310) | Performance and Economics of Aircraft | |
| MECH 5101 (MCG 5311) | Dynamics and Aerodynamics of Flight | |
| MECH 5105 (MCG 5315) | Orbital Mechanics and Space Control | |
| MECH 5106 (MCG 5121) | Space Mission Analysis and Design | |
| MECH 5301 (MCG 5331) | Aeroacoustics | |
| Materials | ||
| MECH 5604 (MCG 5364) | Computational Metallurgy | |
| MECH 5609 (MCG 5123) | Microstructure and Properties of Materials | |
| MECH 5700 (MCG 5345) | Surfaces and Coatings | |
| MECH 5701 (MCG 5369) | Metallic Phases and Transformations | |
| Mechanical | ||
| MECH 5009 (MCG 5309) | Environmental Fluid Mechanics Relating to Energy Utilization | |
| MECH 5104 (MCG 5314) | Ground Transportation Systems and Vehicles | |
| MECH 5201 (MCG 5321) | Methods of Energy Conversion | |
| MECH 5203 (MCG 5322) | Nuclear Engineering | |
| MECH 5205 (MCG 5324) | Building Performance Simulation | |
| MECH 5300 (MCG 5330) | Engineering Acoustics | |
| MECH 5500 (MCG 5350) | Advanced Vibration Analysis | |
| MECH 5704 (MCG 5374) | Integrated Manufacturing Systems (CIMS) | |
| Aerospace, Materials, and Mechanical | ||
| MECH 5107 (MCG 5317) | Experimental Stress Analysis | |
| MECH 5302 (MCG 5332) | Instrumentation Techniques | |
| MECH 5407 (MCG 5347) | Conductive and Radiative Heat Transfer | |
| MECH 5408 (MCG 5348) | Convective Heat and Mass Transfer | |
| MECH 5601 (MCG 5361) | Creative Problem Solving and Design | |
| MECH 5602 (MCG 5362) | Failure Prevention (Fracture Mechanics and Fatigue) | |
| MECH 5603 (MCG 5381) | Lightweight Structures | |
| MECH 5605 (MCG 5365) | Finite Element Analysis I | |
| MECH 5606 (MCG 5366) | Finite Element Analysis II | |
| MECH 5607 (MCG 5367) | The Boundary Element Method (BEM) | |
| Aerospace and Mechanical | ||
| MECH 5000 (MCG 5300) | Fundamentals of Fluid Dynamics | |
| MECH 5001 (MCG 5301) | Theory of Viscous Flows | |
| MECH 5003 (MCG 5303) | Incompressible Non-Viscous Flow | |
| MECH 5004 (MCG 5304) | Compressible Non-Viscous Flow | |
| MECH 5008 (MCG 5308) | Experimental Methods in Fluid Mechanics | |
| MECH 5202 (MCG 5122) | Smart Structures | |
| MECH 5204 (MCG 5483) | Fundamentals of Combustion | |
| MECH 5304 (MCG 5334) | Computational Fluid Dynamics of Compressible Flows | |
| MECH 5400 (MCG 5344) | Gas Turbine Combustion | |
| MECH 5401 (MCG 5341) | Turbomachinery | |
| MECH 5402 (MCG 5342) | Gas Turbines | |
| MECH 5403 (MCG 5343) | Advanced Thermodynamics | |
| MECH 5501 (MCG 5125) | Advanced Dynamics | |
| MECH 5502 (MCG 5352) | Optimal Control Systems | |
| MECH 5503 (MCG 5353) | Robotics | |
| MECH 5504 (MCG 5354) | Guidance, Navigation and Control | |
| MECH 5505 (MCG 5355) | Stability Theory and Applications | |
| MECH 5506 (MCG 5356) | Neuro and Fuzzy Control | |
| MECH 5507 (MCG 5124) | Advanced Kinematics | |
| MECH 5705 (MCG 5375) | CAD/CAM | |
| With the approval of the Department, the following courses can be placed in one of the above categories: | ||
| MECH 5800 (MCG 5480) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5801 (MCG 5489) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5802 (MCG 5483) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5803 (MCG 5488) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5804 (MCG 5384) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5805 (MCG 5482) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5806 (MCG 5486) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5807 (MCG 5387I) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5808 (MCG 5376) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5809 (MCG 5382) | Special Topics in Mechanical and Aerospace Engineering | |
| UNIVERSITY OF OTTAWA | ||
| Materials | ||
| MAAJ 5003 (MCG 5103) | Theory Perfectly Plastic Solid | |
| MAAJ 5100 (MCG 5110) | Micromechanics of Solids | |
| MAAJ 5107 (MCG 5117) | Intro to Composite Materials | |
| MAAJ 5108 (MCG 5118) | Introduction to Plasticity | |
| MAAJ 5206 (MCG 5126) | Deformation of Materials | |
| MAAJ 5209 (MCG 5129) | Hot Working of Metals | |
| MAAJ 5307 (MCG 5137) | Solid Mechanics and Materials | |
| MAAJ 5800 (MCG 5180) | Fibre Composite Materials II | |
| Mechanical | ||
| MAAJ 5004 (MCG 5104) | Theory of Plates and Shells | |
| MAAJ 5104 (MCG 5114) | Analy and Des: Pressure Vessels | |
| MAAJ 5308 (MCG 5138) | Topics in Mech Engineering | |
| MAAJ 5508 (MCG 5158) | Industrial Fluid Mechanics | |
| MAAJ 5509 (MCG 5159) | Production Planning and Control | |
| MAAJ 5601 (MCG 5161) | Environmental Engineering | |
| MAAJ 5608 (MCG 5168) | Industrial Organization | |
| MAAJ 5609 (MCG 5169) | Topics in Reliability Engineer | |
| MAAJ 5701 (MCG 5171) | Applied Reliability Theory | |
| MAAJ 5702 (MCG 5172) | Mgmt of Automation | |
| MAAJ 5703 (MCG 5173) | Systems Engineer and Integration | |
| MAAJ 5706 (MCG 5176) | Industrial Control Systems | |
| MAAJ 5707 (MCG 5177) | Robot Mechanics | |
| MAAJ 5709 (MCG 5179) | Manufacturing System Analysis | |
| MAAJ 5801 (MCG 5181) | Advanced Vibrations | |
| MAAJ 5804 (MCG 5184) | Mechatronics | |
| Aerospace, Materials, and Mechanical | ||
| MAAJ 5001 (MCG 5101) | Theory of Elasticity | |
| MAAJ 5002 (MCG 5102) | Advanced Stress Analysis | |
| MAAJ 5006 (MCG 5106) | Advanced Topics in Elasticity | |
| MAAJ 5008 (MCG 5108) | Finite Element Analysis | |
| MAAJ 5009 (MCG 5109) | Topics:Finite Element Analysis | |
| MAAJ 5109 (MCG 5119) | Fracture Mechanics | |
| MAAJ 5301 (MCG 5131) | Heat Transfer by Conduction | |
| MAAJ 5302 (MCG 5132) | Heat Transfer by Convection | |
| MAAJ 5303 (MCG 5133) | Heat Transfer by Radiation | |
| MAAJ 5304 (MCG 5134) | Heat Transfer w/Phase Change | |
| MAAJ 5306 (MCG 5136) | Fluid Mech and Heat Transfer | |
| MAAJ 5802 (MCG 5182) | Theory of Elastic Instability | |
| Aerospace and Mechanical | ||
| MAAJ 5005 (MCG 5105) | Continuum Mechanics | |
| MAAJ 5007 (MCG 5107) | Adv. Dynamics w/Applications | |
| MAAJ 5101 (MCG 5111) | Gas Dynamics | |
| MAAJ 5105 (MCG 5115) | Non-Linear Optimization | |
| MAAJ 5401 (MCG 5141) | Statistical Thermodynamics | |
| MAAJ 5408 (MCG 5551) | Theorie d'Ecoulement Visqueux | |
| MAAJ 5409 (MCG 5552) | Theorie de Turbulence | |
| MAAJ 5500 (MCG 5557) | Mecanique de Fluides | |
| MAAJ 5501 (MCG 5151) | Laminar Flow Theory | |
| MAAJ 5502 (MCG 5152) | Theory of Turbulance | |
| MAAJ 5505 (MCG 5155) | Inviscid Flow Theory | |
| MAAJ 5506 (MCG 5156) | Measurement of Fluid Mech | |
| MAAJ 5507 (MCG 5157) | Num Comp:Fluid Dyn and Heat Tran | |
| MAAJ 5700 (MCG 5170) | CAD/CAM | |
| MAAJ 5708 (MCG 5178) | Advanced Topics in CAD/CAM | |
| MAAJ 5805 (MCG 5185) | Multivariate Digital Control | |
| MAAJ 5806 (MCG 5186) | Non-Linear Disc Dyn and Control | |
| MAAJ 5901 (MCG 5191) | Combustion in Premixed Systems | |
| MAAJ 5902 (MCG 5192) | Combustion in Diffusion System | |
Mechanical Engineering (MECH) Courses
MECH 5000 [0.5 credit] (MCG 5300)
Fundamentals of Fluid Dynamics
Differential equations of motion. Viscous and inviscid regions. Potential flow: superposition; thin airfoils; finite wings; compressibility corrections. Viscous flow: thin shear layer approximation; laminar layers; transition; turbulence modeling. Convective heat transfer: free versus forced convection; energy and energy integral equations; turbulent diffusion.
Fundamentals of Fluid Dynamics
Differential equations of motion. Viscous and inviscid regions. Potential flow: superposition; thin airfoils; finite wings; compressibility corrections. Viscous flow: thin shear layer approximation; laminar layers; transition; turbulence modeling. Convective heat transfer: free versus forced convection; energy and energy integral equations; turbulent diffusion.
Also offered at the undergraduate level, with different requirements, as AERO 4302, for which additional credit is precluded.
MECH 5001 [0.5 credit] (MCG 5301)
Theory of Viscous Flows
Navier-Stokes and boundary layer equations; mean flow equations for turbulent kinetic energy; integral formulations. Stability, transition, turbulence, Reynolds stresses; separation. Calculation methods, closure schemes. Compressibility, heat transfer, and three-dimensional effects.
Theory of Viscous Flows
Navier-Stokes and boundary layer equations; mean flow equations for turbulent kinetic energy; integral formulations. Stability, transition, turbulence, Reynolds stresses; separation. Calculation methods, closure schemes. Compressibility, heat transfer, and three-dimensional effects.
MECH 5003 [0.5 credit] (MCG 5303)
Incompressible Non-Viscous Flow
The fundamental equations and theorems for non-viscous fluid flow; solution of two-dimensional and axisymmetric potential flows; low-speed airfoil and cascade theory; wing lifting-line theory; panel methods.
Incompressible Non-Viscous Flow
The fundamental equations and theorems for non-viscous fluid flow; solution of two-dimensional and axisymmetric potential flows; low-speed airfoil and cascade theory; wing lifting-line theory; panel methods.
MECH 5004 [0.5 credit] (MCG 5304)
Compressible Non-Viscous Flow
Steady isentropic, frictional, and diabatic flow; shock waves; irrotational compressible flow, small perturbation theory and similarity rules; second-order theory and unsteady, one-dimensional flow.
Compressible Non-Viscous Flow
Steady isentropic, frictional, and diabatic flow; shock waves; irrotational compressible flow, small perturbation theory and similarity rules; second-order theory and unsteady, one-dimensional flow.
MECH 5008 [0.5 credit] (MCG 5308)
Experimental Methods in Fluid Mechanics
Fundamentals of techniques of simulation of fluid dynamic phenomena. Theoretical basis, principles of design, performance and instrumentation of ground test facilities. Applications to aerodynamic testing.
Experimental Methods in Fluid Mechanics
Fundamentals of techniques of simulation of fluid dynamic phenomena. Theoretical basis, principles of design, performance and instrumentation of ground test facilities. Applications to aerodynamic testing.
MECH 5009 [0.5 credit] (MCG 5309)
Environmental Fluid Mechanics Relating to Energy Utilization
Characteristics of energy sources and emissions into the environment. The atmosphere; stratification and stability, equations of motion, simple winds, mean flow, turbulence structure and dispersion near the ground. Flow and dispersion in groundwater, rivers, lakes and oceans. Physical and analytical modeling of environmental flows.
Environmental Fluid Mechanics Relating to Energy Utilization
Characteristics of energy sources and emissions into the environment. The atmosphere; stratification and stability, equations of motion, simple winds, mean flow, turbulence structure and dispersion near the ground. Flow and dispersion in groundwater, rivers, lakes and oceans. Physical and analytical modeling of environmental flows.
MECH 5100 [0.5 credit] (MCG 5310)
Performance and Economics of Aircraft
Aircraft performance analysis with emphasis on factors affecting take-off, landing and economic performance; high lift schemes; operating economics.
Performance and Economics of Aircraft
Aircraft performance analysis with emphasis on factors affecting take-off, landing and economic performance; high lift schemes; operating economics.
MECH 5101 [0.5 credit] (MCG 5311)
Dynamics and Aerodynamics of Flight
Static stability theory. Euler's equations for rigid body motion; the linearized equations of motion; stability derivatives and their estimation. Longitudinal and lateral dynamic response of an aircraft to control and disturbance.
Dynamics and Aerodynamics of Flight
Static stability theory. Euler's equations for rigid body motion; the linearized equations of motion; stability derivatives and their estimation. Longitudinal and lateral dynamic response of an aircraft to control and disturbance.
Also offered at the undergraduate level, with different requirements, as AERO 4308, for which additional credit is precluded.
MECH 5104 [0.5 credit] (MCG 5314)
Ground Transportation Systems and Vehicles
Performance characteristics, handling and directional stability, ride comfort and safety of various types of ground vehicle systems including road vehicles, terrain-vehicle systems, guided transport systems, and advanced ground transport technology.
Ground Transportation Systems and Vehicles
Performance characteristics, handling and directional stability, ride comfort and safety of various types of ground vehicle systems including road vehicles, terrain-vehicle systems, guided transport systems, and advanced ground transport technology.
MECH 5105 [0.5 credit] (MCG 5315)
Orbital Mechanics and Space Control
Orbital dynamics and perturbations due to the Earth's figure, the sun, and the moon with emphasis on mission planning and analysis. Rigid body dynamics applied to transfer orbit and on-orbit momentum management and control of spacecraft. Effects of flexible structures on a spacecraft control system.
Orbital Mechanics and Space Control
Orbital dynamics and perturbations due to the Earth's figure, the sun, and the moon with emphasis on mission planning and analysis. Rigid body dynamics applied to transfer orbit and on-orbit momentum management and control of spacecraft. Effects of flexible structures on a spacecraft control system.
MECH 5106 [0.5 credit] (MCG 5121)
Space Mission Analysis and Design
Review of solar system and space exploration. Space mission design and geometry. Analysis of orbit design, transfers, interplanetary trajectories. Effect of environment on spacecraft design. Space propulsion and launch vehicle design. Launch sequence, windows, cost. Reusable launch systems.
Space Mission Analysis and Design
Review of solar system and space exploration. Space mission design and geometry. Analysis of orbit design, transfers, interplanetary trajectories. Effect of environment on spacecraft design. Space propulsion and launch vehicle design. Launch sequence, windows, cost. Reusable launch systems.
Precludes additional credit for MAAE 4906 (Section B) if taken between 1994-1995 and 2003-2004 inclusive, MECH 5805 taken between 2002-2003 and 2003-2004 inclusive, MAAE 5700 (Section L) taken between 1994-1995 and 1996-1997 inclusive, and MAAE 5805 taken between 1999-2000 and 2001-2002 inclusive.
Also offered at the undergraduate level, with different requirements, as AERO 4802., for which additional credit is precluded.
Also offered at the undergraduate level, with different requirements, as AERO 4802., for which additional credit is precluded.
MECH 5107 [0.5 credit] (MCG 5317)
Experimental Stress Analysis
Introduction to theory of elasticity. Photo-elasticity: types of polariscopes, two- and three-dimensional stress fields, frozen patterns. Photoelastic coatings. Strain gauges; gauge factors, sensitivity, calibration, and temperature compensation. Moire fringes, brittle lacquers, mechanical strain gauges.
Experimental Stress Analysis
Introduction to theory of elasticity. Photo-elasticity: types of polariscopes, two- and three-dimensional stress fields, frozen patterns. Photoelastic coatings. Strain gauges; gauge factors, sensitivity, calibration, and temperature compensation. Moire fringes, brittle lacquers, mechanical strain gauges.
MECH 5201 [0.5 credit] (MCG 5321)
Methods of Energy Conversion
Technical, economic and environmental aspects of present and proposed large-scale systems of energy conversion.
Methods of Energy Conversion
Technical, economic and environmental aspects of present and proposed large-scale systems of energy conversion.
MECH 5202 [0.5 credit] (MCG 5122)
Smart Structures
Structural dynamics principles: modal analysis and wave propagation. Linear time invariant systems: feedback, feedforward, SISO, MIMO, digital and adaptive filters. 'Smart' Structures: multifunctional materials, collocation principles, geometric filtering, and control authority. Applications in aero-acoustics and aeroelasticity.
Smart Structures
Structural dynamics principles: modal analysis and wave propagation. Linear time invariant systems: feedback, feedforward, SISO, MIMO, digital and adaptive filters. 'Smart' Structures: multifunctional materials, collocation principles, geometric filtering, and control authority. Applications in aero-acoustics and aeroelasticity.
Precludes additional credit for MECH 5807 (if taken 2001-2002 to 2003-2004).
MECH 5203 [0.5 credit] (MCG 5322)
Nuclear Engineering
Reactor design and safety requirement overview; reactor physics, chemistry and engineering, CANDU reactor design and operation; CANDU reactor fuel channels, thermalhydraulics and fuel; reactor safety design and analysis; IAEA and Canadian safety analysis requirements; reactor accidents; nuclear energy policy.
Nuclear Engineering
Reactor design and safety requirement overview; reactor physics, chemistry and engineering, CANDU reactor design and operation; CANDU reactor fuel channels, thermalhydraulics and fuel; reactor safety design and analysis; IAEA and Canadian safety analysis requirements; reactor accidents; nuclear energy policy.
MECH 5204 [0.5 credit] (MCG 5483)
Fundamentals of Combustion
Emphasis on gas phase reacting flows. Background of combustion thermodynamics, diffusion mass transfer, and chemical kinetics. Detonations and deflagrations. Chemical and dynamic structure of flames. Gaseous flame propagation under laminar and turbulent conditions. Flame stabilization and extinction. Introduction to burning rate theory.
Fundamentals of Combustion
Emphasis on gas phase reacting flows. Background of combustion thermodynamics, diffusion mass transfer, and chemical kinetics. Detonations and deflagrations. Chemical and dynamic structure of flames. Gaseous flame propagation under laminar and turbulent conditions. Flame stabilization and extinction. Introduction to burning rate theory.
MECH 5205 [0.5 credit] (MCG 5324)
Building Performance Simulation
During this course students will develop an understanding of the methodologies and theory employed historically and contemporarily in the Building Performance Simulation (BPS) field, develop capabilities for extending the functionality of BPS tools, and establish skills in applying BPS tools in research, analysis, and design.
Building Performance Simulation
During this course students will develop an understanding of the methodologies and theory employed historically and contemporarily in the Building Performance Simulation (BPS) field, develop capabilities for extending the functionality of BPS tools, and establish skills in applying BPS tools in research, analysis, and design.
MECH 5300 [0.5 credit] (MCG 5330)
Engineering Acoustics
Review of acoustic waves in compressible fluids; acoustic pressure, intensity and impedance; physical interpretation and measurement; transmission through media; layers, in-homogeneous media, solids; acoustic systems; rooms, ducts, resonators, mufflers, properties of transducers; microphones, loudspeakers, computational acoustics.
Engineering Acoustics
Review of acoustic waves in compressible fluids; acoustic pressure, intensity and impedance; physical interpretation and measurement; transmission through media; layers, in-homogeneous media, solids; acoustic systems; rooms, ducts, resonators, mufflers, properties of transducers; microphones, loudspeakers, computational acoustics.
MECH 5301 [0.5 credit] (MCG 5331)
Aeroacoustics
The convected wave equation; theory of subsonic and supersonic jet noise; propeller and helicopter noise; fan and compressor noise; boundary layer noise, interior noise; propagation in the atmosphere; sonic boom; impact on environment.
Aeroacoustics
The convected wave equation; theory of subsonic and supersonic jet noise; propeller and helicopter noise; fan and compressor noise; boundary layer noise, interior noise; propagation in the atmosphere; sonic boom; impact on environment.
MECH 5302 [0.5 credit] (MCG 5332)
Instrumentation Techniques
An introduction for the non-specialists to the concepts of digital and analog electronics with emphasis on data acquisition, processing and analysis. Topics covered include operational amplifiers, signal processing, digital logic systems, computer interfacing, noise in electronic systems. Hands-on sessions illustrate theory and practice.
Instrumentation Techniques
An introduction for the non-specialists to the concepts of digital and analog electronics with emphasis on data acquisition, processing and analysis. Topics covered include operational amplifiers, signal processing, digital logic systems, computer interfacing, noise in electronic systems. Hands-on sessions illustrate theory and practice.
MECH 5304 [0.5 credit] (MCG 5334)
Computational Fluid Dynamics of Compressible Flows
Solution techniques for parabolic, elliptic and hyperbolic equations developed for problems of interest to fluid dynamics with appropriate stability considerations. A staged approach to solution of full Euler and Navier-Stokes equations is used. Grid generation techniques appropriate for compressible flows are introduced.
Computational Fluid Dynamics of Compressible Flows
Solution techniques for parabolic, elliptic and hyperbolic equations developed for problems of interest to fluid dynamics with appropriate stability considerations. A staged approach to solution of full Euler and Navier-Stokes equations is used. Grid generation techniques appropriate for compressible flows are introduced.
MECH 5400 [0.5 credit] (MCG 5344)
Gas Turbine Combustion
Combustion fundamentals and gas turbine combustor design. Combustion fundamentals include fuel evaporation, chemistry of combustion, chemical kinetics and emissions formation and introduction to computational combustion modelling. Combustor design addresses the interrelationship between operational requirements and combustion fundamentals.
Gas Turbine Combustion
Combustion fundamentals and gas turbine combustor design. Combustion fundamentals include fuel evaporation, chemistry of combustion, chemical kinetics and emissions formation and introduction to computational combustion modelling. Combustor design addresses the interrelationship between operational requirements and combustion fundamentals.
MECH 5401 [0.5 credit] (MCG 5341)
Turbomachinery
Types of machines. Similarity: performance parameters; characteristics; cavitation. Velocity triangles. Euler equation: impulse and reaction. Radial pumps and compressors: analysis, design and operation. Axial pumps and compressors: cascade and blade-element methods; staging; off-design performance; stall and surge. Axial turbines. Current design practice.
Turbomachinery
Types of machines. Similarity: performance parameters; characteristics; cavitation. Velocity triangles. Euler equation: impulse and reaction. Radial pumps and compressors: analysis, design and operation. Axial pumps and compressors: cascade and blade-element methods; staging; off-design performance; stall and surge. Axial turbines. Current design practice.
MECH 5402 [0.5 credit] (MCG 5342)
Gas Turbines
Interrelationship among thermodynamic, aerodynamic, and mechanical design. Ideal and real cycle calculations. Cycle optimization; turbo-shaft, turbojet, turbofan. Component performance. Off-design performance; matching of compressor, turbine, nozzle. Twin-spool matching.
Gas Turbines
Interrelationship among thermodynamic, aerodynamic, and mechanical design. Ideal and real cycle calculations. Cycle optimization; turbo-shaft, turbojet, turbofan. Component performance. Off-design performance; matching of compressor, turbine, nozzle. Twin-spool matching.
MECH 5403 [0.5 credit] (MCG 5343)
Advanced Thermodynamics
The course covers three major topics: review of fundamentals from a consistent viewpoint, properties and equations of state, and applications and special topics. The third topic includes an introduction to statistical thermodynamics.
Advanced Thermodynamics
The course covers three major topics: review of fundamentals from a consistent viewpoint, properties and equations of state, and applications and special topics. The third topic includes an introduction to statistical thermodynamics.
MECH 5407 [0.5 credit] (MCG 5347)
Conductive and Radiative Heat Transfer
Analytical, numerical and analog solutions to steady-state and transient conduction heat transfer in multi-dimensional systems. Radiative heat exchange between black, grey, non-grey diffusive and specular surfaces, including effects of athermanous media.
Conductive and Radiative Heat Transfer
Analytical, numerical and analog solutions to steady-state and transient conduction heat transfer in multi-dimensional systems. Radiative heat exchange between black, grey, non-grey diffusive and specular surfaces, including effects of athermanous media.
MECH 5408 [0.5 credit] (MCG 5348)
Convective Heat and Mass Transfer
Analogies between heat, mass and momentum transfer. Forced and free convection relations for laminar and turbulent flows analytically developed where possible and otherwise deduced from experimental results, for simple shapes and in heat exchangers. Mass transfer theory and applications.
Convective Heat and Mass Transfer
Analogies between heat, mass and momentum transfer. Forced and free convection relations for laminar and turbulent flows analytically developed where possible and otherwise deduced from experimental results, for simple shapes and in heat exchangers. Mass transfer theory and applications.
MECH 5500 [0.5 credit] (MCG 5350)
Advanced Vibration Analysis
General theory of continuous and discrete multi-degree-of-freedom vibrating systems. Emphasis on numerical techniques of solving complex vibrating systems, with selected applications from aerospace, civil, and mechanical engineering.
Advanced Vibration Analysis
General theory of continuous and discrete multi-degree-of-freedom vibrating systems. Emphasis on numerical techniques of solving complex vibrating systems, with selected applications from aerospace, civil, and mechanical engineering.
MECH 5501 [0.5 credit] (MCG 5125)
Advanced Dynamics
Developing and applying the governing equations of motion for discrete and continuous mechanical systems. Includes Newton-Euler and Lagrangian formulations; classical and finite element approaches for continuous systems; and linear stability, frequency response, and propagation solution methods.
Advanced Dynamics
Developing and applying the governing equations of motion for discrete and continuous mechanical systems. Includes Newton-Euler and Lagrangian formulations; classical and finite element approaches for continuous systems; and linear stability, frequency response, and propagation solution methods.
Precludes additional credit for MECH 5500 (if taken 2001-2002, 2002-2003).
MECH 5502 [0.5 credit] (MCG 5352)
Optimal Control Systems
Review of transfer function and state-space system descriptions. Elements of the optimal control problem. Variational calculus. Optimal state feedback control. Riccati equations. Optimal observers and Kalman-Bucy Filters. Extension to discrete time systems including an introduction to dynamic programming. Practical applications are emphasized throughout the course.
Optimal Control Systems
Review of transfer function and state-space system descriptions. Elements of the optimal control problem. Variational calculus. Optimal state feedback control. Riccati equations. Optimal observers and Kalman-Bucy Filters. Extension to discrete time systems including an introduction to dynamic programming. Practical applications are emphasized throughout the course.
MECH 5503 [0.5 credit] (MCG 5353)
Robotics
The history of and introduction to robotics methodology. Robots and manipulators; homogeneous transformation, kinematic equations, solving kinematic equations, differential relationships, motion trajectories, dynamics. Control; feedback control, compliance, servomotors, actuators, external and internal sensors, grippers and vision systems. Microprocessors and their application to robot control. Programming.
Robotics
The history of and introduction to robotics methodology. Robots and manipulators; homogeneous transformation, kinematic equations, solving kinematic equations, differential relationships, motion trajectories, dynamics. Control; feedback control, compliance, servomotors, actuators, external and internal sensors, grippers and vision systems. Microprocessors and their application to robot control. Programming.
MECH 5504 [0.5 credit] (MCG 5354)
Guidance, Navigation and Control
Guidance system classification, flight control systems, targeting, target tracking, sensing. Modern multivariable control analysis; design requirements, sensitivity, robustness, perturbations, performance analysis. Modern filtering and estimation techniques. Terrestrial navigation; tactical air navigation (TACAN), star trackers Guidance mission and performance. Aircraft, missile and spacecraft guidance and control.
Guidance, Navigation and Control
Guidance system classification, flight control systems, targeting, target tracking, sensing. Modern multivariable control analysis; design requirements, sensitivity, robustness, perturbations, performance analysis. Modern filtering and estimation techniques. Terrestrial navigation; tactical air navigation (TACAN), star trackers Guidance mission and performance. Aircraft, missile and spacecraft guidance and control.
MECH 5505 [0.5 credit] (MCG 5355)
Stability Theory and Applications
Fundamental concepts and characteristics of modern stability definitions. Sensitivity and variational equations; linear variational equations; phase space analysis; Lyapunov's direct method. Autonomous and nonautonomous systems; stability in first approximation; the effect of force type on stability; frequency method.
Stability Theory and Applications
Fundamental concepts and characteristics of modern stability definitions. Sensitivity and variational equations; linear variational equations; phase space analysis; Lyapunov's direct method. Autonomous and nonautonomous systems; stability in first approximation; the effect of force type on stability; frequency method.
MECH 5506 [0.5 credit] (MCG 5356)
Neuro and Fuzzy Control
Knowledge-based controllers. Fuzzy control: mathematics, relations, operations, approximate reasoning. Fuzzy knowledge base control and structure. Fuzzification, inference engine, defuzzification. Nonlinear, adaptive fuzzy control systems. Stability, Neuro-control: processing, learning. Adaptation of artificial neural systems: associative memories, algorithms, applications, and network implementation. Neurofuzzy systems: industrial applications.
Neuro and Fuzzy Control
Knowledge-based controllers. Fuzzy control: mathematics, relations, operations, approximate reasoning. Fuzzy knowledge base control and structure. Fuzzification, inference engine, defuzzification. Nonlinear, adaptive fuzzy control systems. Stability, Neuro-control: processing, learning. Adaptation of artificial neural systems: associative memories, algorithms, applications, and network implementation. Neurofuzzy systems: industrial applications.
Precludes additional credit for EACJ 5709 (ELG 5196).
MECH 5507 [0.5 credit] (MCG 5124)
Advanced Kinematics
Algebraic-geometry applications: kinematic calibration of serial and in-parallel robots; kinematic synthesis of planar, spherical, spatial mechanisms. Various DH-parametrisations, Jacobian formulations. Topics in: projective geometry; Cayley-Klein geometries; Plücker line coordinates; Gröbner bases; Grassmannians; kinematic mapping; Burmester theory. Emphasis on practical applications.
Advanced Kinematics
Algebraic-geometry applications: kinematic calibration of serial and in-parallel robots; kinematic synthesis of planar, spherical, spatial mechanisms. Various DH-parametrisations, Jacobian formulations. Topics in: projective geometry; Cayley-Klein geometries; Plücker line coordinates; Gröbner bases; Grassmannians; kinematic mapping; Burmester theory. Emphasis on practical applications.
MECH 5601 [0.5 credit] (MCG 5361)
Creative Problem Solving and Design
Problem-solving processes and how they can be applied in engineering design. Emphasis on learning methodologies rather than accumulating information. Techniques can be successfully applied in any engineering specialty.
Creative Problem Solving and Design
Problem-solving processes and how they can be applied in engineering design. Emphasis on learning methodologies rather than accumulating information. Techniques can be successfully applied in any engineering specialty.
Also listed as IDES 5301.
MECH 5602 [0.5 credit] (MCG 5362)
Failure Prevention (Fracture Mechanics and Fatigue)
Design of engineering structures to ensure against failure due to fatigue or brittle fracture. Nature of fatigue and brittle fracture; selection of suitable material, geometry, and inspection procedures for the load and environmental conditions.
Failure Prevention (Fracture Mechanics and Fatigue)
Design of engineering structures to ensure against failure due to fatigue or brittle fracture. Nature of fatigue and brittle fracture; selection of suitable material, geometry, and inspection procedures for the load and environmental conditions.
MECH 5603 [0.5 credit] (MCG 5381)
Lightweight Structures
Structural behaviour. Fundamentals of basic elasticity. Energy methods of structural analysis. Bending, shear, and torsion of open and closed multicell structures. Bending of plates. Structural idealization and its effects on open and closed sections. Structural stability.
Lightweight Structures
Structural behaviour. Fundamentals of basic elasticity. Energy methods of structural analysis. Bending, shear, and torsion of open and closed multicell structures. Bending of plates. Structural idealization and its effects on open and closed sections. Structural stability.
MECH 5604 [0.5 credit] (MCG 5364)
Computational Metallurgy
Development of microstructure in alloys in solidification processes and post-solidification processing. Nucleation and growth of solid phase. Formation of a dendrite structure, macro and micro segregations. Pore formation in castings. Thermodynamic and kinetics of phase transformations and structure evolution in solid alloys.
Computational Metallurgy
Development of microstructure in alloys in solidification processes and post-solidification processing. Nucleation and growth of solid phase. Formation of a dendrite structure, macro and micro segregations. Pore formation in castings. Thermodynamic and kinetics of phase transformations and structure evolution in solid alloys.
MECH 5605 [0.5 credit] (MCG 5365)
Finite Element Analysis I
An introduction to the finite element methodology, with emphasis on applications to heat transfer, fluid flow and stress analysis. The basic concepts of Galerkin's method, interpolation, numerical integration, and isoparametric elements are taught using simple examples.
Finite Element Analysis I
An introduction to the finite element methodology, with emphasis on applications to heat transfer, fluid flow and stress analysis. The basic concepts of Galerkin's method, interpolation, numerical integration, and isoparametric elements are taught using simple examples.
MECH 5606 [0.5 credit] (MCG 5366)
Finite Element Analysis II
Time marching heat flow problems with linear and nonlinear analysis. Static plasticity. Time-dependent deformation problems; viscoplasticity, viscoelasticity, and dynamic analysis. Isoparametric elements and numerical integration are used throughout.
Finite Element Analysis II
Time marching heat flow problems with linear and nonlinear analysis. Static plasticity. Time-dependent deformation problems; viscoplasticity, viscoelasticity, and dynamic analysis. Isoparametric elements and numerical integration are used throughout.
MECH 5607 [0.5 credit] (MCG 5367)
The Boundary Element Method (BEM)
Integral equations. The BIE for potential theory and for elastostatics in two-dimensions. Boundary elements and numerical integration schemes. Practical applications.
The Boundary Element Method (BEM)
Integral equations. The BIE for potential theory and for elastostatics in two-dimensions. Boundary elements and numerical integration schemes. Practical applications.
MECH 5609 [0.5 credit] (MCG 5123)
Microstructure and Properties of Materials
Essential microstructural features of metals and alloys: crystal structure, dislocations, grain boundaries. The importance of these features in controlling mechanical properties is emphasized. Analytical techniques observing microstructure in metals and other materials: TEM, SEM, electron diffraction, spectrometry.
Microstructure and Properties of Materials
Essential microstructural features of metals and alloys: crystal structure, dislocations, grain boundaries. The importance of these features in controlling mechanical properties is emphasized. Analytical techniques observing microstructure in metals and other materials: TEM, SEM, electron diffraction, spectrometry.
Precludes additional credit for MECH 5804 (if taken 2002-2003, 2003-2004).
MECH 5700 [0.5 credit] (MCG 5345)
Surfaces and Coatings
Surface characteristics of solid materials and surface degradation/failure mechanisms including wear, fretting, oxidation, corrosion, and erosion are introduced. Coating methods including PVD, CVD, laser, thermal spray and electrochemical deposition are discussed in the context of failure prevention measures.
Surfaces and Coatings
Surface characteristics of solid materials and surface degradation/failure mechanisms including wear, fretting, oxidation, corrosion, and erosion are introduced. Coating methods including PVD, CVD, laser, thermal spray and electrochemical deposition are discussed in the context of failure prevention measures.
MECH 5701 [0.5 credit] (MCG 5369)
Metallic Phases and Transformations
Thermodynamics of crystals, phase diagrams, principles of alloy phases, thermal analysis. Transformation rate and mechanisms. Short and long range diffusional transformations, diffusionless transformations. Phase transformations in engineering systems.
Metallic Phases and Transformations
Thermodynamics of crystals, phase diagrams, principles of alloy phases, thermal analysis. Transformation rate and mechanisms. Short and long range diffusional transformations, diffusionless transformations. Phase transformations in engineering systems.
Precludes additional credit for MECH 5608 if taken during 2001-2002 or during 2005-2006.
Prerequisite(s): MECH 2700 or the equivalent.
Prerequisite(s): MECH 2700 or the equivalent.
MECH 5704 [0.5 credit] (MCG 5374)
Integrated Manufacturing Systems (CIMS)
Topics essential to CIMS including computer graphics, geometric modeling, numerically controlled machining, and flexible manufacturing. The fundamental data structures and procedures for computerization of engineering design, analysis and production.
Integrated Manufacturing Systems (CIMS)
Topics essential to CIMS including computer graphics, geometric modeling, numerically controlled machining, and flexible manufacturing. The fundamental data structures and procedures for computerization of engineering design, analysis and production.
Also offered at the undergraduate level, with different requirements, as MECH 4704, for which additional credit is precluded.
MECH 5705 [0.5 credit] (MCG 5375)
CAD/CAM
Computer aided design and manufacturing methodology through hands-on experience and state-of-the-art software. Topics include mathematical representation, solid modeling, drafting, mechanical assembly, mechanism design and CNC machining. CAD data exchange standards, rapid prototyping, concurrent engineering and design for X are also discussed.
CAD/CAM
Computer aided design and manufacturing methodology through hands-on experience and state-of-the-art software. Topics include mathematical representation, solid modeling, drafting, mechanical assembly, mechanism design and CNC machining. CAD data exchange standards, rapid prototyping, concurrent engineering and design for X are also discussed.
MECH 5800 [0.5 credit] (MCG 5480)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5801 [0.5 credit] (MCG 5489)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5802 [0.5 credit] (MCG 5483)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5803 [0.5 credit] (MCG 5488)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5804 [0.5 credit] (MCG 5384)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5805 [0.5 credit] (MCG 5482)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5806 [0.5 credit] (MCG 5486)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5807 [0.5 credit] (MCG 5387I)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5808 [0.5 credit] (MCG 5376)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5809 [0.5 credit] (MCG 5382)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5906 [0.5 credit]
Directed Studies
Directed Studies
MECH 5908 [1.5 credit] (MCG 5398)
Independent Engineering Study
Students pursuing a master's degree by course work carry out an independent study, analysis, and solution of an engineering problem or design project. The results are given in the form of a written report and presented at a departmental seminar. Carried out under the general direction of a faculty member.
Independent Engineering Study
Students pursuing a master's degree by course work carry out an independent study, analysis, and solution of an engineering problem or design project. The results are given in the form of a written report and presented at a departmental seminar. Carried out under the general direction of a faculty member.
MECH 5909 [2.5 credits]
M.A.Sc. Thesis
M.A.Sc. Thesis
MECH 6909 [8.5 credits]
Ph.D. Thesis
Ph.D. Thesis
Summer session: some of the courses listed in this Calendar are offered during the summer. Hours and scheduling for summer session courses will differ significantly from those reported in the fall/winter Calendar. To determine the scheduling and hours for summer session classes, consult the class schedule at central.carleton.ca
Not all courses listed are offered in a given year. For an up-to-date statement of course offerings for the current session and to determine the term of offering, consult the class schedule at central.carleton.ca
Admission
The normal requirement for admission to the master's program is a bachelor's degree with at least high honours standing in mechanical or aerospace engineering or a related discipline.
Admission
The normal requirement for admission to the Ph.D. program is a master's degree in mechanical or aerospace engineering or a related discipline.
Students who are in the master's program may be admitted to the Ph.D. program if they show outstanding academic performance and demonstrate significant promise for advanced research, upon recommendation of the department.In addition, graduate courses offered by departments in other disciplines may be taken for credit with approval by the department in which the student is registered.