Department of Electronics
(Faculty of Engineering and Design)
Electronics (ELEC) Courses
ELEC 1908 [0.5 credit]
First Year Project
A practical introduction to engineering design. Students work in small teams to specify, design and implement a system, formally managing the project progress and submitting oral and written reports. Professionalism: engineering ethics; health and safety. Technology, society and the environment.
First Year Project
A practical introduction to engineering design. Students work in small teams to specify, design and implement a system, formally managing the project progress and submitting oral and written reports. Professionalism: engineering ethics; health and safety. Technology, society and the environment.
Includes: Experiential Learning Activity
Prerequisite(s): registration in the Engineering Physics program.
Lectures and tutorials three hours a week, laboratory four hours a week.
Prerequisite(s): registration in the Engineering Physics program.
Lectures and tutorials three hours a week, laboratory four hours a week.
ELEC 2501 [0.5 credit]
Circuits and Signals
Properties of signals. Basic circuit elements: voltage and current sources. Kirchhoff's laws, linearity, superposition. Thevenin and Norton's theorems. Circuit simplification. AC steady-state analysis: impedance, admittance, phasors, frequency response. Transient response of RL and RC circuits: form of response, initial and final conditions. RLC circuits: resonance.
Circuits and Signals
Properties of signals. Basic circuit elements: voltage and current sources. Kirchhoff's laws, linearity, superposition. Thevenin and Norton's theorems. Circuit simplification. AC steady-state analysis: impedance, admittance, phasors, frequency response. Transient response of RL and RC circuits: form of response, initial and final conditions. RLC circuits: resonance.
Includes: Experiential Learning Activity
Precludes additional credit for ELEC 3605.
Prerequisite(s): MATH 1005 (may be taken concurrently) and (PHYS 1004 or PHYS 1002), and second-year status in Engineering.
Lectures three hours a week, laboratory and problem analysis three hours a week.
Precludes additional credit for ELEC 3605.
Prerequisite(s): MATH 1005 (may be taken concurrently) and (PHYS 1004 or PHYS 1002), and second-year status in Engineering.
Lectures three hours a week, laboratory and problem analysis three hours a week.
ELEC 2507 [0.5 credit]
Electronics I
Qualitative semiconductor physics, leading to the diode equation. Diode applications. Operational amplifiers and their application in feedback configurations including active filters. Introduction to bipolar transistors and MOSFETs, analysis of biasing circuits. Transistor applications including small signal amplifiers.
Electronics I
Qualitative semiconductor physics, leading to the diode equation. Diode applications. Operational amplifiers and their application in feedback configurations including active filters. Introduction to bipolar transistors and MOSFETs, analysis of biasing circuits. Transistor applications including small signal amplifiers.
Includes: Experiential Learning Activity
Precludes additional credit for OSS 2006, PLT 2006 (no longer offered).
Prerequisite(s): MATH 1005, ELEC 2501, and second-year status in Engineering.
Lectures three hours a week, laboratory and problem analysis three hours a week.
Precludes additional credit for OSS 2006, PLT 2006 (no longer offered).
Prerequisite(s): MATH 1005, ELEC 2501, and second-year status in Engineering.
Lectures three hours a week, laboratory and problem analysis three hours a week.
ELEC 2602 [0.5 credit]
Electric Machines and Power
Modeling and analysis of basic electric power systems. Single-phase and three-phase circuits: real and reactive power, per-phase analysis, power factor correction. Electro-mechanical energy conversion: operation, characteristics and analysis of transformers, DC-, induction-, and synchronous electric machines. Motor and generator operation.
Electric Machines and Power
Modeling and analysis of basic electric power systems. Single-phase and three-phase circuits: real and reactive power, per-phase analysis, power factor correction. Electro-mechanical energy conversion: operation, characteristics and analysis of transformers, DC-, induction-, and synchronous electric machines. Motor and generator operation.
Includes: Experiential Learning Activity
Prerequisite(s): PHYS 1004 and ELEC 2501, and second-year status in Engineering.
Lectures 3 hours per week. Laboratory and problem analysis 3 hours per week alternate weeks.
Prerequisite(s): PHYS 1004 and ELEC 2501, and second-year status in Engineering.
Lectures 3 hours per week. Laboratory and problem analysis 3 hours per week alternate weeks.
ELEC 2607 [0.5 credit]
Switching Circuits
Boolean algebra, gate, combinatorial circuits. DeMorgan notation, sum-of-product and product-of-sum forms. Logic arrays, PLAs and PALs. Flip-flops, latches, sequential circuits, state graphs and state minimization. Counters and controllers. Hazards. Asynchronous sequential circuits, race free assignment, realization.
Switching Circuits
Boolean algebra, gate, combinatorial circuits. DeMorgan notation, sum-of-product and product-of-sum forms. Logic arrays, PLAs and PALs. Flip-flops, latches, sequential circuits, state graphs and state minimization. Counters and controllers. Hazards. Asynchronous sequential circuits, race free assignment, realization.
Includes: Experiential Learning Activity
Precludes additional credit for SYSC 2310.
Prerequisite(s): PHYS 1004 or PHYS 1002 and second-year status in Engineering.
Lectures three hours a week, laboratory three hours alternate weeks.
Precludes additional credit for SYSC 2310.
Prerequisite(s): PHYS 1004 or PHYS 1002 and second-year status in Engineering.
Lectures three hours a week, laboratory three hours alternate weeks.
ELEC 3105 [0.5 credit]
Basic EM and Power Engineering
Electrostatics and magnetostatics. Solution of Poisson's and Laplace's equations. The Lorenz equation and force. Time varying fields. Magnetic circuits and transformers. DC and AC machines. Basic three-phase power.
Basic EM and Power Engineering
Electrostatics and magnetostatics. Solution of Poisson's and Laplace's equations. The Lorenz equation and force. Time varying fields. Magnetic circuits and transformers. DC and AC machines. Basic three-phase power.
Includes: Experiential Learning Activity
Prerequisite(s): MATH 1005, MATH 2004, and (PHYS 1004 or PHYS 1002), and second-year status in Engineering.
Lectures three hours a week, laboratory and problem analysis three hours alternate weeks.
Prerequisite(s): MATH 1005, MATH 2004, and (PHYS 1004 or PHYS 1002), and second-year status in Engineering.
Lectures three hours a week, laboratory and problem analysis three hours alternate weeks.
ELEC 3500 [0.5 credit]
Digital Electronics
Digital circuit design using verilog and logic synthesis, the electronic properties of logic gates, electrical interfacing between logic families, asynchronous to synchronous interfacing, clock distribution and timing, VLSI design options. Students implement substantial circuits with field-programmable gate arrays.
Digital Electronics
Digital circuit design using verilog and logic synthesis, the electronic properties of logic gates, electrical interfacing between logic families, asynchronous to synchronous interfacing, clock distribution and timing, VLSI design options. Students implement substantial circuits with field-programmable gate arrays.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 2507 and ELEC 2607.
Lectures three hours a week, laboratory three hours a week.
Prerequisite(s): ELEC 2507 and ELEC 2607.
Lectures three hours a week, laboratory three hours a week.
ELEC 3508 [0.5 credit]
Power Electronics
Power transformers. DC and AC motors. Power semiconductor devices: Thyristors, Triacs, MCTs, IGBTs). Converter circuits: controlled AC to DC rectifiers, choppers, DC to AC inverters, AC voltage controllers, cycloconverters. Protection of conversion circuits. Applications to high-efficiency control of electric machines and electromechanical energy conversion devices.
Power Electronics
Power transformers. DC and AC motors. Power semiconductor devices: Thyristors, Triacs, MCTs, IGBTs). Converter circuits: controlled AC to DC rectifiers, choppers, DC to AC inverters, AC voltage controllers, cycloconverters. Protection of conversion circuits. Applications to high-efficiency control of electric machines and electromechanical energy conversion devices.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 2501 and ELEC 2507.
Lectures three hours per week, laboratories/problem analysis three hours per week.
Prerequisite(s): ELEC 2501 and ELEC 2507.
Lectures three hours per week, laboratories/problem analysis three hours per week.
ELEC 3509 [0.5 credit]
Electronics II
Introduction to semiconductor devices and ICs. DC, AC and switching properties of BJTs. Linear amplifiers; bandwidth considerations; two-port analysis. Large signal amplifiers; power amplifiers; transformerless circuits. Feedback and operational amplifiers; gain, sensitivity, distortion and stability. Filter design. Oscillators.
Electronics II
Introduction to semiconductor devices and ICs. DC, AC and switching properties of BJTs. Linear amplifiers; bandwidth considerations; two-port analysis. Large signal amplifiers; power amplifiers; transformerless circuits. Feedback and operational amplifiers; gain, sensitivity, distortion and stability. Filter design. Oscillators.
Includes: Experiential Learning Activity
Precludes additional credit for : ELEC 3509 may not be taken for credit by students in the Biomedical and Electrical Engineering or Biomedical and Mechanical Engineering programs.
Prerequisite(s): ELEC 2507.
Lectures three hours a week, laboratory three hours a week.
Precludes additional credit for : ELEC 3509 may not be taken for credit by students in the Biomedical and Electrical Engineering or Biomedical and Mechanical Engineering programs.
Prerequisite(s): ELEC 2507.
Lectures three hours a week, laboratory three hours a week.
ELEC 3605 [0.5 credit]
Electrical Engineering
DC circuits: elements, sources, analysis. Single phase AC circuits: phasors, RLC circuits, real and reactive power, impedance, network analysis, three phase systems. Power transformers. DC motors: operation and characteristics. AC motors: single phase and three phase.
Electrical Engineering
DC circuits: elements, sources, analysis. Single phase AC circuits: phasors, RLC circuits, real and reactive power, impedance, network analysis, three phase systems. Power transformers. DC motors: operation and characteristics. AC motors: single phase and three phase.
Includes: Experiential Learning Activity
Precludes additional credit for ELEC 2501.
Prerequisite(s): MATH 1005 and (PHYS 1004 or PHYS 1002), and second-year status in Engineering.
Lectures three hours a week, problem analysis 1.5 hours a week.
Precludes additional credit for ELEC 2501.
Prerequisite(s): MATH 1005 and (PHYS 1004 or PHYS 1002), and second-year status in Engineering.
Lectures three hours a week, problem analysis 1.5 hours a week.
ELEC 3907 [0.5 credit]
Engineering Project
Student teams work on open-ended projects based on previously acquired knowledge. Lectures are devoted to discussing project-related issues and student presentations. A project proposal, a series of project reports, and oral presentations, and a comprehensive final report are required.
Engineering Project
Student teams work on open-ended projects based on previously acquired knowledge. Lectures are devoted to discussing project-related issues and student presentations. A project proposal, a series of project reports, and oral presentations, and a comprehensive final report are required.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 2607, ELEC 2507, and ((ECOR 1051, ECOR 1052, ECOR 1053 and ECOR 1054) or (ECOR 2606)), and enrolment in the Electrical Engineering program.
Lecture two hours per week, laboratory six hours per week.
Prerequisite(s): ELEC 2607, ELEC 2507, and ((ECOR 1051, ECOR 1052, ECOR 1053 and ECOR 1054) or (ECOR 2606)), and enrolment in the Electrical Engineering program.
Lecture two hours per week, laboratory six hours per week.
ELEC 3908 [0.5 credit]
Physical Electronics
Fundamentals of device physics and operation of the pn junction, bipolar transistor and MOSFET. Basic integrated circuit processing and application to diodes, BJTs and MOSFETs. Correlation between processing, structure, operation and modeling. Consideration of parasitic and small-geometry effects, reliability and process variation.
Physical Electronics
Fundamentals of device physics and operation of the pn junction, bipolar transistor and MOSFET. Basic integrated circuit processing and application to diodes, BJTs and MOSFETs. Correlation between processing, structure, operation and modeling. Consideration of parasitic and small-geometry effects, reliability and process variation.
Includes: Experiential Learning Activity
Precludes additional credit for ELEC 4705.
Prerequisite(s): ELEC 2507.
Lectures three hours a week, problem analysis two hours a week.
Precludes additional credit for ELEC 4705.
Prerequisite(s): ELEC 2507.
Lectures three hours a week, problem analysis two hours a week.
ELEC 3909 [0.5 credit]
Electromagnetic Waves
Maxwell's equations and EM wave solutions. Polarization. Poynting vector. EM waves in dielectrics and conductors; skin depth. Reflection and refraction. Standing waves. Fresnel relations, Brewster angle. Transmission lines. Line termination, basic impedance matching and transformation. Smith charts. Introduction to guided waves; slab waveguide.
Electromagnetic Waves
Maxwell's equations and EM wave solutions. Polarization. Poynting vector. EM waves in dielectrics and conductors; skin depth. Reflection and refraction. Standing waves. Fresnel relations, Brewster angle. Transmission lines. Line termination, basic impedance matching and transformation. Smith charts. Introduction to guided waves; slab waveguide.
Includes: Experiential Learning Activity
Precludes additional credit for PHYS 3308.
Prerequisite(s): ELEC 3105 or permission of the Department.
Lectures three hours a week, problem analysis three hours alternate weeks.
Precludes additional credit for PHYS 3308.
Prerequisite(s): ELEC 3105 or permission of the Department.
Lectures three hours a week, problem analysis three hours alternate weeks.
ELEC 3999 [0.0 credit]
Co-operative Work Term
Co-operative Work Term
Includes: Experiential Learning Activity
ELEC 4502 [0.5 credit]
Microwave Circuits
Introduction to microwave semiconductor devices, microwave passive components, microwave integrated circuit technology, and microwave circuit measurements. Basic network theory and scattering matrix description of circuits. Design of matching networks, filters, amplifiers and oscillators at microwave frequencies.
Microwave Circuits
Introduction to microwave semiconductor devices, microwave passive components, microwave integrated circuit technology, and microwave circuit measurements. Basic network theory and scattering matrix description of circuits. Design of matching networks, filters, amplifiers and oscillators at microwave frequencies.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 4503; may be taken concurrently.
Lectures three hours a week, laboratory three hours alternate weeks.
Prerequisite(s): ELEC 4503; may be taken concurrently.
Lectures three hours a week, laboratory three hours alternate weeks.
ELEC 4503 [0.5 credit]
Radio Frequency Lines and Antennas
Introduction to distributed circuits, travelling and standing waves, reflection coefficient, SWR, impedance transformation, Smith charts. Introduction to transmission lines; coaxial, rectangular waveguide, resonators, optical fibers. Introduction to antennas; gain, directivity, effective area. Introduction to linear arrays.
Radio Frequency Lines and Antennas
Introduction to distributed circuits, travelling and standing waves, reflection coefficient, SWR, impedance transformation, Smith charts. Introduction to transmission lines; coaxial, rectangular waveguide, resonators, optical fibers. Introduction to antennas; gain, directivity, effective area. Introduction to linear arrays.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 3909.
Lectures three hours a week, laboratory three hours alternate weeks.
Prerequisite(s): ELEC 3909.
Lectures three hours a week, laboratory three hours alternate weeks.
ELEC 4504 [0.5 credit]
Avionics Systems
Electromagnetic spectrum. Air data sensing, display. Communications systems. Navigation and landing systems; ground-based, inertial and satellite systems. Airborne radar. Guidance, control for aircraft, autopilots; stability augmentation; active control; sensor requirements; display techniques. Aircraft power systems. Safety systems. Vehicle/systems integration, certification.
Avionics Systems
Electromagnetic spectrum. Air data sensing, display. Communications systems. Navigation and landing systems; ground-based, inertial and satellite systems. Airborne radar. Guidance, control for aircraft, autopilots; stability augmentation; active control; sensor requirements; display techniques. Aircraft power systems. Safety systems. Vehicle/systems integration, certification.
Precludes additional credit for AERO 4504 (no longer offered).
Prerequisite(s): fourth-year status in Engineering. Not open to students in Electrical Engineering, Computer Systems Engineering, Engineering Physics or Communications Engineering.
Lecture three hours a week.
Prerequisite(s): fourth-year status in Engineering. Not open to students in Electrical Engineering, Computer Systems Engineering, Engineering Physics or Communications Engineering.
Lecture three hours a week.
ELEC 4505 [0.5 credit]
Telecommunication Circuits
A course of study of the commonly used circuit components in modern telecommunication systems. Both analog and digital systems are included. The design of the hardware is emphasized. Examples are drawn from broadcasting, telephony and satellite systems.
Telecommunication Circuits
A course of study of the commonly used circuit components in modern telecommunication systems. Both analog and digital systems are included. The design of the hardware is emphasized. Examples are drawn from broadcasting, telephony and satellite systems.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 3509 and (SYSC 3501 or SYSC 3503).
Lectures three hours a week, laboratory three hours alternate weeks.
Prerequisite(s): ELEC 3509 and (SYSC 3501 or SYSC 3503).
Lectures three hours a week, laboratory three hours alternate weeks.
ELEC 4506 [0.5 credit]
Computer-Aided Design of Circuits and Systems
Basic principles of Computer-Aided Design tools used for analysis and design of communication circuits and systems. Frequency and time-domain analysis. Noise and distortion analysis. Transmission line effects. Sensitivity analysis and circuit performance optimization. Digital simulation.
Computer-Aided Design of Circuits and Systems
Basic principles of Computer-Aided Design tools used for analysis and design of communication circuits and systems. Frequency and time-domain analysis. Noise and distortion analysis. Transmission line effects. Sensitivity analysis and circuit performance optimization. Digital simulation.
Includes: Experiential Learning Activity
Prerequisite(s): fourth-year status in Engineering.
Lectures three hours a week, laboratory three hours alternate weeks.
Prerequisite(s): fourth-year status in Engineering.
Lectures three hours a week, laboratory three hours alternate weeks.
ELEC 4509 [0.5 credit]
Communication Links
Fundamentals; decibel, intermodulation, 1dB compression, dynamic range, SNR, noise figure, noise temperature, antenna gain, EIRP, G/T. Line-of-sight links; receiver, diversity, fade margin. Satellite links; link calculations, multiple accessing, earth stations. Fiber links, fiber types, sources, detectors, systems.
Communication Links
Fundamentals; decibel, intermodulation, 1dB compression, dynamic range, SNR, noise figure, noise temperature, antenna gain, EIRP, G/T. Line-of-sight links; receiver, diversity, fade margin. Satellite links; link calculations, multiple accessing, earth stations. Fiber links, fiber types, sources, detectors, systems.
Includes: Experiential Learning Activity
Prerequisite(s): fourth-year status in Engineering or permission of the Department.
Lectures three hours a week, problem analysis three hours alternate weeks.
Prerequisite(s): fourth-year status in Engineering or permission of the Department.
Lectures three hours a week, problem analysis three hours alternate weeks.
ELEC 4600 [0.5 credit]
Radar and Navigation
Radar: operation, minimum detectable signal, propagation effects. Surveillance Radars: Moving Target indicator and Pulse Doppler operation. Radio Navigation: pulsed and CW operation. Operational systems: Loran C., VOR/DME, TACAN, Global Positioning system. Inertial Navigation. Navigation Co-ordinate Systems. Techniques for determining best estimates of position.
Radar and Navigation
Radar: operation, minimum detectable signal, propagation effects. Surveillance Radars: Moving Target indicator and Pulse Doppler operation. Radio Navigation: pulsed and CW operation. Operational systems: Loran C., VOR/DME, TACAN, Global Positioning system. Inertial Navigation. Navigation Co-ordinate Systems. Techniques for determining best estimates of position.
Includes: Experiential Learning Activity
Prerequisite(s): fourth-year status in Engineering or permission of the Department.
Lectures three hours a week, problem analysis 3 hours alternate weeks.
Prerequisite(s): fourth-year status in Engineering or permission of the Department.
Lectures three hours a week, problem analysis 3 hours alternate weeks.
ELEC 4601 [0.5 credit]
Microprocessor Systems
Interfacing aspects in microprocessor systems. Microprocessors and bus structures, internal architecture, instruction set and pin functions. Memory interfacing, input-output, interrupts, direct memory accesses, special processors and multiprocessor systems.
Microprocessor Systems
Interfacing aspects in microprocessor systems. Microprocessors and bus structures, internal architecture, instruction set and pin functions. Memory interfacing, input-output, interrupts, direct memory accesses, special processors and multiprocessor systems.
Includes: Experiential Learning Activity
Precludes additional credit for COMP 3006 (no longer offered), SYSC 3320, SYSC 3601.
Prerequisite(s): ELEC 2607 and one of SYSC 2003 or SYSC 3003 (no longer offered) or SYSC 3006 or permission of the Department.
Lectures three hours a week, laboratory three hours alternate weeks.
Precludes additional credit for COMP 3006 (no longer offered), SYSC 3320, SYSC 3601.
Prerequisite(s): ELEC 2607 and one of SYSC 2003 or SYSC 3003 (no longer offered) or SYSC 3006 or permission of the Department.
Lectures three hours a week, laboratory three hours alternate weeks.
ELEC 4602 [0.5 credit]
Electrical Power Engineering
The electric power system. Major components: induction and synchronous machines, power transformers and connections, transmission. Analysis: balanced and unbalanced three-phase systems, symmetrical components, load flow. Operation: frequency control, steady state and transient generator stability, voltage collapse, thermal constraints. Variable speed drives, power quality.
Electrical Power Engineering
The electric power system. Major components: induction and synchronous machines, power transformers and connections, transmission. Analysis: balanced and unbalanced three-phase systems, symmetrical components, load flow. Operation: frequency control, steady state and transient generator stability, voltage collapse, thermal constraints. Variable speed drives, power quality.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 2501 or ELEC 3605.
Lectures three hours a week, problem analysis two hours a week.
Prerequisite(s): ELEC 2501 or ELEC 3605.
Lectures three hours a week, problem analysis two hours a week.
ELEC 4609 [0.5 credit]
Integrated Circuit Design and Fabrication
Introduction to nMOS IC design: static logic gates, noise margin, transmission gates, factors influencing switching speed, dynamic logic, input protection, output buffers, circuit simulation with SPICE. Laboratory work includes design and layout of a simple nMOS IC that is fabricated and returned for testing.
Integrated Circuit Design and Fabrication
Introduction to nMOS IC design: static logic gates, noise margin, transmission gates, factors influencing switching speed, dynamic logic, input protection, output buffers, circuit simulation with SPICE. Laboratory work includes design and layout of a simple nMOS IC that is fabricated and returned for testing.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 3500 or ELEC 3908.
Lectures three hours a week, laboratory and problem analysis three hours alternate weeks.
Prerequisite(s): ELEC 3500 or ELEC 3908.
Lectures three hours a week, laboratory and problem analysis three hours alternate weeks.
ELEC 4700 [0.5 credit]
The Physics and Modeling of Advanced Devices and Technologies
Fabrication, operation and modeling of advanced devices for information technology. Topics: physics of materials, quantum mechanics of solids, optical transitions, physical analysis and models for state-of-the-art electronic/optical technologies and materials. Technologies: MOS and III-V based transistors, solid-state optical devices, MEMS and nano-technology based devices.
The Physics and Modeling of Advanced Devices and Technologies
Fabrication, operation and modeling of advanced devices for information technology. Topics: physics of materials, quantum mechanics of solids, optical transitions, physical analysis and models for state-of-the-art electronic/optical technologies and materials. Technologies: MOS and III-V based transistors, solid-state optical devices, MEMS and nano-technology based devices.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 3908.
Lectures three hours a week, problem analysis two hours alternate weeks.
Prerequisite(s): ELEC 3908.
Lectures three hours a week, problem analysis two hours alternate weeks.
ELEC 4702 [0.5 credit]
Fiber Optic Communications
Fundamentals of optoelectronics with application to fiber optic communications. Optical fibre: modes, losses, dispersion, splices, coupling to sources. Optical sources: LEDs, laser diodes. Optical detectors: photoconductor, pin and avalanche photodiodes. Optical receiver design. Fiber optic communications systems: intensity modulation/direct detection; coherent homodyne or heterodyne detection.
Fiber Optic Communications
Fundamentals of optoelectronics with application to fiber optic communications. Optical fibre: modes, losses, dispersion, splices, coupling to sources. Optical sources: LEDs, laser diodes. Optical detectors: photoconductor, pin and avalanche photodiodes. Optical receiver design. Fiber optic communications systems: intensity modulation/direct detection; coherent homodyne or heterodyne detection.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 3908 and ELEC 3909.
Lectures three hours a week, laboratory three hours alternate weeks.
Prerequisite(s): ELEC 3908 and ELEC 3909.
Lectures three hours a week, laboratory three hours alternate weeks.
ELEC 4703 [0.5 credit]
Solar Cells
Semiconductor band structure, photogeneration, the solar spectrum. Detailed analysis of monocrystalline silicon solar cells. Solar cells based on thin film materials: amorphous silicon, III-V materials, organics, titania-dye cells. Cells for concentrator systems. Photovoltaic power systems. Solar cells for building envelopes.
Solar Cells
Semiconductor band structure, photogeneration, the solar spectrum. Detailed analysis of monocrystalline silicon solar cells. Solar cells based on thin film materials: amorphous silicon, III-V materials, organics, titania-dye cells. Cells for concentrator systems. Photovoltaic power systems. Solar cells for building envelopes.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 2501 and ELEC 2507 and fourth-year status in Sustainable and Renewable Energy Engineering, or ELEC 2501 and ELEC 2507 and fourth-year status in Engineering with permission of the instructor.
Lectures three hours per week, laboratories/problem analysis three hours alternate weeks.
Prerequisite(s): ELEC 2501 and ELEC 2507 and fourth-year status in Sustainable and Renewable Energy Engineering, or ELEC 2501 and ELEC 2507 and fourth-year status in Engineering with permission of the instructor.
Lectures three hours per week, laboratories/problem analysis three hours alternate weeks.
ELEC 4704 [0.5 credit]
Nanoscale Technology and Devices
Engineering at the nanoscale. Quantum confinement and the effect of scale. Analysis tools: microscopy, spectroscopy. Fabrication: thin films, nanoparticles, nanotubes, graphene, organics. Structures and properties: quantum wells, nanocrystals, nanostructuring. Applications and devices: electronics, optoelectronics, photonics.
Nanoscale Technology and Devices
Engineering at the nanoscale. Quantum confinement and the effect of scale. Analysis tools: microscopy, spectroscopy. Fabrication: thin films, nanoparticles, nanotubes, graphene, organics. Structures and properties: quantum wells, nanocrystals, nanostructuring. Applications and devices: electronics, optoelectronics, photonics.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 3908, ELEC 3909.
Lectures three hours a week, problem analysis 1.5 hours a week.
Prerequisite(s): ELEC 3908, ELEC 3909.
Lectures three hours a week, problem analysis 1.5 hours a week.
ELEC 4705 [0.5 credit]
Electronic Materials, Devices and Transmission Media
Review of solid-state theory, conductors, semiconductors, superconductors, insulators, and optical and magnetic properties. Devices used in modern high speed electronic and communication systems: transistors, lasers, photodiodes, fiber optics, Josephson junctions. Implications of material properties on fabrication and operation of devices and circuits.
Electronic Materials, Devices and Transmission Media
Review of solid-state theory, conductors, semiconductors, superconductors, insulators, and optical and magnetic properties. Devices used in modern high speed electronic and communication systems: transistors, lasers, photodiodes, fiber optics, Josephson junctions. Implications of material properties on fabrication and operation of devices and circuits.
Precludes additional credit for ELEC 3908.
Prerequisite(s): fourth-year status in Engineering. Not available for credit to students in Electrical Engineering or Engineering Physics.
Lectures three hours a week.
Prerequisite(s): fourth-year status in Engineering. Not available for credit to students in Electrical Engineering or Engineering Physics.
Lectures three hours a week.
ELEC 4706 [0.5 credit]
Digital Integrated Electronics
Lectures and hands-on experience introduce advanced concepts in digital interfacing and hardware simulation. Industry standard programmable ASIC design tools, interfacing techniques and System on a Chip are introduced along with hardware modeling and design flow. A modern laboratory includes software and hardware digital design tools.
Digital Integrated Electronics
Lectures and hands-on experience introduce advanced concepts in digital interfacing and hardware simulation. Industry standard programmable ASIC design tools, interfacing techniques and System on a Chip are introduced along with hardware modeling and design flow. A modern laboratory includes software and hardware digital design tools.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 3500.
Lectures two hours a week, laboratory three hours a week.
Prerequisite(s): ELEC 3500.
Lectures two hours a week, laboratory three hours a week.
ELEC 4707 [0.5 credit]
Analog Integrated Electronics
Emphasis on integration of analog signal processing techniques in monolithic IC technology. Continuous active filter design. MOS IC technology. OP amp design. Basic sampled data concepts; Z-transform analysis, switched capacitor filters. Noise aspects. Bipolar technology: radio frequency IC design.
Analog Integrated Electronics
Emphasis on integration of analog signal processing techniques in monolithic IC technology. Continuous active filter design. MOS IC technology. OP amp design. Basic sampled data concepts; Z-transform analysis, switched capacitor filters. Noise aspects. Bipolar technology: radio frequency IC design.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 3509.
Lectures three hours a week, laboratory and problem analysis three hours alternate weeks.
Prerequisite(s): ELEC 3509.
Lectures three hours a week, laboratory and problem analysis three hours alternate weeks.
ELEC 4708 [0.5 credit]
Advanced Digital Integrated Circuit Design
Advanced Verilog, test benches. VLSI design based on CMOS technology, characteristics of CMOS logic circuits, cell libraries, building blocks, structured design, testing, Computer-Aided Design tools. Laboratory emphasis on design synthesis from Verilog.
Advanced Digital Integrated Circuit Design
Advanced Verilog, test benches. VLSI design based on CMOS technology, characteristics of CMOS logic circuits, cell libraries, building blocks, structured design, testing, Computer-Aided Design tools. Laboratory emphasis on design synthesis from Verilog.
Includes: Experiential Learning Activity
Prerequisite(s): fourth-year status in Engineering and ELEC 3500 or permission of the Department.
Lectures three hours a week, laboratory and problem analysis three hours alternate weeks.
Prerequisite(s): fourth-year status in Engineering and ELEC 3500 or permission of the Department.
Lectures three hours a week, laboratory and problem analysis three hours alternate weeks.
ELEC 4709 [0.5 credit]
Integrated Sensors
Overview of sensor technologies with emphasis on devices suitable for integration with silicon integrated circuits. Sensor design and fabrication principles including signal conditioning; discussion of automotive, biomedical, and other instrumentation applications.
Integrated Sensors
Overview of sensor technologies with emphasis on devices suitable for integration with silicon integrated circuits. Sensor design and fabrication principles including signal conditioning; discussion of automotive, biomedical, and other instrumentation applications.
Includes: Experiential Learning Activity
Prerequisite(s): fourth-year status in Engineering.
Lectures three hours a week, laboratory and problem analysis three hours alternate weeks.
Prerequisite(s): fourth-year status in Engineering.
Lectures three hours a week, laboratory and problem analysis three hours alternate weeks.
ELEC 4906 [0.5 credit]
Special Topics
At the discretion of the Engineering Faculty Board, a course dealing with selected advanced topics of interest to students in Biomedical and Electrical, Communications, Computer Systems, Electrical and Software Engineering and Engineering Physics may be offered.
Special Topics
At the discretion of the Engineering Faculty Board, a course dealing with selected advanced topics of interest to students in Biomedical and Electrical, Communications, Computer Systems, Electrical and Software Engineering and Engineering Physics may be offered.
Includes: Experiential Learning Activity
Prerequisite(s): fourth-year status in Engineering.
Lectures three hours a week, laboratory and problem analysis three hours alternate weeks.
Prerequisite(s): fourth-year status in Engineering.
Lectures three hours a week, laboratory and problem analysis three hours alternate weeks.
ELEC 4907 [1.0 credit]
Engineering Project
Student teams develop professional-level experience by applying, honing, integrating, and extending previously acquired knowledge in a major design project. Lectures are devoted to discussing project-related issues and student presentations. A project proposal, interim report, oral presentations, and a comprehensive final report are required.
Engineering Project
Student teams develop professional-level experience by applying, honing, integrating, and extending previously acquired knowledge in a major design project. Lectures are devoted to discussing project-related issues and student presentations. A project proposal, interim report, oral presentations, and a comprehensive final report are required.
Includes: Experiential Learning Activity
Prerequisite(s): ELEC 3907, ECOR 3800, ECOR 4995 (may be taken concurrently) and fourth-year status in Engineering.
Lecture one hour a week, laboratory seven hours a week.
Prerequisite(s): ELEC 3907, ECOR 3800, ECOR 4995 (may be taken concurrently) and fourth-year status in Engineering.
Lecture one hour a week, laboratory seven hours a week.
ELEC 4908 [1.0 credit]
Engineering Physics Project
Student teams develop professional-level experience by applying, honing, integrating, and extending previously acquired knowledge in a major design project approved for Engineering Physics. Lectures devoted to discussing project-related issues and student presentations. A project proposal, interim report, oral presentations, and comprehensive final report are required.
Engineering Physics Project
Student teams develop professional-level experience by applying, honing, integrating, and extending previously acquired knowledge in a major design project approved for Engineering Physics. Lectures devoted to discussing project-related issues and student presentations. A project proposal, interim report, oral presentations, and comprehensive final report are required.
Includes: Experiential Learning Activity
Prerequisite(s): ECOR 3800, fourth-year status in Engineering and ECOR 4995 (may be taken concurrently). Certain projects may have additional prerequisites or corequisites.
Lecture one hour a week, laboratory seven hours a week.
Prerequisite(s): ECOR 3800, fourth-year status in Engineering and ECOR 4995 (may be taken concurrently). Certain projects may have additional prerequisites or corequisites.
Lecture one hour a week, laboratory seven hours a week.
Summer session: some of the courses listed in this Calendar are offered during the summer. Hours and scheduling for summer session courses will differ significantly from those reported in the fall/winter Calendar. To determine the scheduling and hours for summer session classes, consult the class schedule at central.carleton.ca
Not all courses listed are offered in a given year. For an up-to-date statement of course offerings for the current session and to determine the term of offering, consult the class schedule at central.carleton.ca