Ottawa-Carleton Institute for Environmental Engineering
Minto Centre
Room 3090
Phone: 613-520-5659
Fax: 613-520-7481
http://www.ociene.ca/
This section presents the requirements for programs in:
- M.A.Sc. Environmental Engineering
- M.Eng. Environmental Engineering
- M.A.Sc. Environmental Engineering with Collaborative Specialization in Climate Change
- M.Eng. Environmental Engineering with Collaborative Specialization in Climate Change
- Ph.D. Environmental Engineering
Program Requirements
M.A.Sc. Environmental Engineering (5.0 credits)
Study at the master's level can be pursued through a thesis leading to a M.A.Sc., a project option leading to a M.Eng., or a coursework option leading to a M. Eng. The requirements for coursework are specified in terms of credits. At Carleton University, 1.0 credit typically comprises three hours of lectures or seminars a week for two terms, or the equivalent. At the University of Ottawa, 1.0 course credit is one hour of instruction per week for one term. Thus 1.0 credit in Carleton University notation is equivalent to 6 course credits in the University of Ottawa notation. The requirements are:
Requirements - Thesis option: | ||
1. 2.5 credits in courses, with at least 0.5 credit from each of at least three of the areas of study listed below | 2.5 | |
2. Participation in the graduate seminar series: | 0.0 | |
ENVE 5800 [0.0] | Master's Seminar (participation in the graduate seminar series) | |
3. 2.5 credits in: | 2.5 | |
ENVE 5909 [2.5] | Master's Thesis (including successful oral defence) | |
Total Credits | 5.0 |
M.Eng. Environmental Engineering (5.0 credits)
Requirements - Project option (5.0 credits) | ||
1. 4.0 credits in courses | 4.0 | |
2. 1.0 credit in: | 1.0 | |
ENVE 5900 [1.0] | Environmental Engineering Project | |
3. Participation in the graduate student seminar series: | 0.0 | |
ENVE 5800 [0.0] | Master's Seminar | |
Total Credits | 5.0 |
Requirements - Coursework option (5.0 credits) | ||
1. Completion of a minimum of 5.0 credits by course | 5.0 | |
Total Credits | 5.0 |
Breadth Requirement
In keeping with the objective of ensuring a breadth of knowledge for graduates of the program, students in the master's program are expected to take at least one graduate level course from each of at least three of the following areas of study:
- Air Pollution
- Water Resources Management, Groundwater Management and Contaminant Transport
- Management of Solid, Hazardous, and Radioactive Waste, and Pollution Prevention
- Water and Wastewater Treatment
- Environmental Impact Assessment, Sustainability and Climate Change
This requirement serves the objectives of educating graduate professionals who are not only specialized in one area but who are sufficiently familiar with problems and different approaches in the other areas to enable them to interact readily at a technical level with colleagues working in those areas. In addition to the courses associated with the individual areas, students will be encouraged to select courses from fundamental areas such as chemistry, numerical modelling, and applied statistics.
Master's candidates transferring from another university must take at least half their courses at the Institute.
M.A.Sc. Environmental Engineering
with Collaborative Specialization in Climate Change (5.0 credits)
Requirements: | ||
1. 1.0 credit in: | 1.0 | |
CLIM 5000 [1.0] | Climate Collaboration | |
2. 0.0 credit in: | ||
CLIM 5800 [0.0] | Climate Seminar Series | |
3. 1.5 credits in courses, with at least 0.5 credit from two different areas of study listed below outside the area of EIA, Sustainability and Climate Change | 1.5 | |
4. 0.0 credit in: | ||
ENVE 5800 [0.0] | Master's Seminar (participation in the graduate student seminar series) | |
5. 2.5 credits in: | 2.5 | |
ENVE 5909 [2.5] | Master's Thesis (in the specialization) | |
Total Credits | 5.0 |
M.Eng. Environmental Engineering
with Collaborative Specialization in Climate Change (5.0 credits)
Requirements - Project pathway | ||
1. 1.0 credit in: | 1.0 | |
CLIM 5000 [1.0] | Climate Collaboration | |
2. 0.0 credit in: | ||
CLIM 5800 [0.0] | Climate Seminar Series | |
3. 0.5 credit from: | 0.5 | |
ENVE 5105 [0.5] | Atmospheric Aerosols | |
ENVE 5200 [0.5] | Climate Change and Engineering | |
ENVE 5201 [0.5] | Geo-Environmental Engineering | |
ENVE 5205 [0.5] | Sludge Treatment and Disposal | |
ENVJ 5908 [0.5] | Anaerobic Digestion | |
ENVJ 5212 [0.5] | Climate Change Impacts on Water Resources | |
or approved Special Topics in the area of climate change | ||
4. 2.5 credits in courses, with at least 0.5 credit from two different areas of study listed below outside the area of EIA, Sustainability and Climate Change | 2.5 | |
5. 0.0 credit in: | ||
ENVE 5800 [0.0] | Master's Seminar | |
6. 1.0 credit in: | 1.0 | |
ENVE 5900 [1.0] | Environmental Engineering Project (in the specialization) | |
Total Credits | 5.0 |
Requirements - Coursework pathway | ||
1. 1.0 credit in: | 1.0 | |
CLIM 5000 [1.0] | Climate Collaboration | |
2. 0.0 credit in: | ||
CLIM 5800 [0.0] | Climate Seminar Series | |
3. 1.5 credits from: | 1.5 | |
ENVE 5105 [0.5] | Atmospheric Aerosols | |
ENVE 5200 [0.5] | Climate Change and Engineering | |
ENVE 5201 [0.5] | Geo-Environmental Engineering | |
ENVE 5205 [0.5] | Sludge Treatment and Disposal | |
ENVJ 5908 [0.5] | Anaerobic Digestion | |
ENVJ 5212 [0.5] | Climate Change Impacts on Water Resources | |
or approved Special Topics in the area of climate change | ||
4. 2.5 credits in courses, with at least 0.5 credit from two different areas of study listed below outside the area of EIA, Sustainability and Climate Change | 2.5 | |
Total Credits | 5.0 |
Ph.D. Environmental Engineering (2.0 credits)
Ph.D. Environmental Engineering (1.5 credits) | ||
1. 1.5 credits in courses | 1.5 | |
2. 0.5 credits in: | 0.5 | |
ENVE 7800 [0.5] | Ph.D. Seminar | |
3. 0.0 credit in: Successful completion of the comprehensive examination, which consists of the successful defence of a PhD Thesis Proposal | ||
ENVE 6902 [0.0] | Ph.D. Comprehensive Examination | |
4. 0.0 credits in: | 0.0 | |
ENVE 6909 [0.0] | Ph.D. Thesis (Including successful oral defence) | |
Total Credits | 2.0 |
Ph.D. candidates transferring from another university must take at least half of their courses at the Institute.
Graduate Courses
Course selection is subject to the approval of the adviser or the Advisory committee. Students may choose courses offered at either university from among those listed below.
The courses listed below are grouped by area of study. Master's students must complete at least one course in three of the five areas. The program's Associate Chair (graduate affairs), in consultation with the Institute's Director or Associate Director, will decide when a course offered outside the Institute or offered under a Special Topics or Directed Studies heading can be considered to meet the requirements of a given area. Course descriptions may be found in the departmental sections of the calendars concerned. Course codes in parentheses are for University of Ottawa (EVG, CVG and CHG), and those that begin with the prefix "ENVE" or "CIVE" are offered at Carleton. Only a selection of courses is given in a particular academic year.
Full course descriptions for courses offered at Carleton can be found in the relevant courses section of this calendar.
Air Pollution | ||
ENVE 5101 (EVG 7101) | Air Pollution Control | |
ENVE 5105 (EVG 7105) | Atmospheric Aerosols | |
ENVE 5106 (EVG 7106) | Atmospheric Chemical Transport Modelling | |
ENVJ 5105 (CHG 8132) | Adsorption Separation Process |
Water Resources Management, Groundwater Management, and Contaminant Transport | ||
CIVJ 5502 (CVG 5112) | Computational Hydrodynamics | |
CIVJ 5503 (CVG 5160) | Sediment Transport | |
CIVJ 5504 (CVG 5162) | River Hydraulics | |
CIVJ 5605 (CVG 5124) | Coastal Engineering | |
ENVE 5301 (EVG 7301) | Contaminant Hydrogeology | |
ENVE 5303 (EVG 7303) | Multiphase Flow in Soils | |
ENVJ 5182 (EVG 5182) | Water Resources Management | |
ENVJ 5183 (EVG 5183) | Mixing and Transport in Water Bodies | |
ENVJ 5301 (EVG 5301) | Soil and Water Conservation Engineering | |
ERTH 5403 (GEO 5143) | Environmental Isotopes and Groundwater Geochemistry | |
ERTH 5407 (GEO 5147) | Aqueous Inorganic Geochemistry and Modelling | |
ERTH 5503 (GEO 5153) | Computer Techniques in the Earth Sciences |
Management of Solid, Hazardous, and Radioactive Waste and Pollution Prevention | ||
CIVJ 5109 (CVG 5314) | Geotechnical Hazards | |
ENVE 5201 (EVG 7201) | Geo-Environmental Engineering | |
ENVE 5204 (EVG 7134) | Resource Industry Waste Management | |
ENVE 5205 (EVG 7132) | Sludge Treatment and Disposal | |
ENVJ 5903 (EVG 5331) | Sludge Utilization and Disposal | |
ENVJ 5906 (EVG 5133) | Solid Waste Management | |
ENVJ 5908 (EVG 5179) | Anaerobic Digestion |
Water and Wastewater Treatment | ||
ENVE 5004 (EVG 7144) | Advanced Wastewater Treatment | |
ENVE 5007 (EVG 7101) | Filtration and Membranes in Water Treatment | |
ENVJ 5001 (EVG 5001) | Biofilm Processes in Wastewater Treatment | |
ENVJ 5302 (EVG 5302) | Decentralized Wastewater Management | |
ENVJ 5502 (CHG 8192) | Membranes in Clean Processes | |
ENVJ 5900 (EVG 5130) | Wastewater Treatment Process Design | |
ENVJ 5901 (EVG 5132) | Unit Operations of Water Treatment | |
ENVJ 5902 (EVG 5138) | Advanced Water Treatment | |
ENVJ 5905 (EVG 5137) | Water and Wastewater Treatment Process Analysis | |
ENVJ 5907 (EVG 5134) | Chemistry for Environmental Engineering |
Environmental Impact Assessment, Sustainability and Climate Change | ||
ENVE 5200 (EVG 7200) | Climate Change and Engineering | |
ENVE 5206 | Energy and Resource Recovery from Waste | |
ENVJ 5212 (EVG 5212) | Climate Change Impacts on Water Resources | |
ENVJ 5700 (CVG 5139) | Environmental Assessment of Civil Engineering Projects |
To fulfill the requirements beyond the 1.5 credits of area courses, students may choose from the following:
Other Institute Courses | ||
ENVJ 5333 (EVG 5333) | Research Methodology | |
ENVJ 5504 (CVG 8194) | Membrane Liquid Separation Processes and Materials | |
ENVJ 5505 (CHG 8195) | Advanced Numerical Methods in Chemical and Biological Engineering | |
ENVJ 5507 (CHG 8196) | Interfacial Phenomena in Engineering | |
GEOG 5804 | Geographic Information Systems |
Seminars, Directed Studies and Special Topics | ||
ENVE 5701 (EVG 7001) | Topics in Environmental Engineering | |
ENVE 5702 (EVG 7002) | Topics in Environmental Engineering | |
ENVE 5704 (EVG 7004) | Topics in Environmental Engineering | |
ENVE 5703 (EVG 7003) | Topics in Environmental Engineering | |
ENVE 5705 (EVG 7005) | Topics in Environmental Engineering | |
ENVE 5800 (EVG 7305) | Master's Seminar | |
ENVE 5906 (EVG 6108) | Directed Studies 1 | |
ENVE 6906 (EVG 6109) | Directed Studies 2 | |
ENVE 7800 (EVG 6109) | Ph.D. Seminar | |
ENVJ 6300 (EVG 6300) | Special Topics in Environmental Engineering | |
ENVJ 6301 (EVG 6301) | Special Topics in Environmental Engineering | |
ENVJ 6302 (EVG 6302) | Special Topics in Environmental Engineering | |
ENVJ 6303 (EVG 6303) | Special Topics in Environmental Engineering | |
ENVJ 6304 (EVG 6304) | Special Topics in Environmental Engineering |
Special Topics courses in Civil or Chemical Engineering will count as Institute courses only if approved by the program's Associate Chair (graduate affairs), in consultation with the Institute's Director or Associate Director.
Projects and Theses | ||
ENVE 5900 (EVG 6001) | Environmental Engineering Project | |
ENVE 5909 (EVG 7999) | Master's Thesis | |
ENVE 6909 (EVG 9999) | Ph.D. Thesis | |
(EVG 9998) Comprehensive Examination |
Non-Institute Courses
Students may also, subject to approval, select courses from the graduate programs in Civil, Chemical and Mechanical Engineering, as well as in Biology, Chemistry, Earth Sciences, Computer Sciences, Geography and Public Policy and Administration at both universities. Courses taken outside the Institute will not count towards the degree requirements unless approved by the adviser or the advisory committee and the program's Associate Chair (graduate affairs). In all programs, at least one half of the course work must be taken from the Institute.
Environmental Engineering - Joint (ENVJ) Courses
Biofilm Processes in Wastewater Treatment
Adsorption Separation Process
Mixing and Transport in Water Bodies
Climate Change Impacts on Water Resources
Soil and Water Conservation Engineering
Decentralized Wastewater Management
Research Methodology
Membranes in Clean Processes
Membrane Liquid Separation Processes and Materials
Advanced Numerical Methods in Chemical and Biological Engineering
Interfacial Phenomena in Engineering
Environmental Assessment of Civil Engineering Projects
Wastewater Treatment Process Design
Unit Operations of Water Treatment
Advanced Water Treatment
Sludge Utilization and Disposal
Water and Wastewater Treatment Process Analysis
Solid Waste Management
Chemistry for Environmental Engineering
Anaerobic Digestion
Special Topics in Environmental Engineering
Special Topics in Environmental Engineering
Special Topics in Environmental Engineering
Special Topics in Environmental Engineering
Special Topics in Environmental Engineering
Selected Topics in Chemical Engineering
Environmental Engineering (ENVE) Courses
Advanced Wastewater Treatment
Fundamentals, applications, and design of biological, physical, and chemical treatment processes employed for advanced treatment of domestic and industrial wastewater. Reuse applications and guidelines.
Filtration and Membranes in Water Treatment
Filtration is a key process for removal of contaminants from water sources. This course discusses various filtration processes including slow sand filtration, conventional filtration, biological filtration, and low and high pressure membrane applications in a lecture and seminar format. Previous water related course knowledge expected.
Air Pollution Control
Air quality and pollution; definitions, measurement and monitoring methods. Criteria pollutants, air toxics, particulate matter, secondary pollutants. Pollutant formation mechanisms. Major sources and control methods. Meteorology and principles of dispersion modeling. Principles of receptor modeling. Indoor air quality.
Atmospheric Aerosols
Atmospheric aerosol characterization and size distribution, theoretical fundamentals of physical and chemical processes that govern formation and transformation of aerosols in the atmosphere such as nucleation, coagulation, condensation/evaporation, and aerosol thermodynamics; interactions between aerosols and climate, aerosol sampling and measurement.
Atmospheric Chemical Transport Modelling
Fundamentals of Eulerian atmospheric modelling; overview of global and regional atmospheric models, basic principles of numerical methods used in air quality models; applications of air quality models; uncertainty and sensitivity analysis in air quality modelling.
Radiative Transfer and Remote Sensing
Exploration of interactions between light, Earth’s surface, and the atmosphere. Topics include the radiative transfer equation, scattering and phase functions, and inverse theory. Applications to atmospheric science, climate, hydrology, and land use.
Climate Change and Engineering
Survey of the physical science of climate change, impacts on the built environment, and climate adaptation in engineering. Greenhouse gases, global warming, paleoclimatology, and Earth system responses. Climate change impacts on structural, water, transportation, and energy systems. Climate vulnerability assessment, examples of design adaptation.
Geo-Environmental Engineering
Landfill design; hydrogeologic principles, water budget, landfill liners, geosynthetics, landfill covers, quality control and quality assurance, clay/leachate interaction, composite liner design and leachate collection systems. Landfill operation, maintenance and monitoring. Design of environmental control and containment systems; slurry walls, grout curtains, Case studies.
Also offered at the undergraduate level, with different requirements, as ENVE 4002, for which additional credit is precluded.
Resource Industry Waste Management
Application of geotechnique and hydraulics to management of resource extraction residuals such as tailings, waste rock, and sludge from hard rock mines and bitumen extraction operations. Geotechnique of conventional and high density tailings disposal. Pipeline transport of concentrated suspensions. Closure technologies for mine waste impoundments.
Sludge Treatment and Disposal
Aspects of sludge treatment, management, and disposal; sludge generation and characterization, thickening, preliminary treatment processes, aerobic and anaerobic digestion, lime stabilization, conditioning, dewatering, composting, land application and other disposal options, and thermal processes.
Energy and Resource Recovery from Waste
Principles, design and application of biochemical and thermal processes for recovery of energy and value-added materials from different solid wastes and wastewater. Biochemical processes; biotransformation pathways, reactor analysis and chemical kinetics. Thermal treatment systems; process design, thermodynamics of material recovery.
Contaminant Hydrogeology
Theory of flow through porous media; soil characterization, soil properties, anisotropy, heterogeneity. Contaminant transport. Well hydraulics and pump tests. Introduction to numerical modeling; finite difference, finite elements, conceptual model, boundary conditions. Site remediation and remediation technologies.
Multiphase Flow in Soils
Theory of unsaturated flow and multiphase flow; capillary pressure-saturation relationships, relative permeability relationships, wettability, hysteresis, fluid entrapment, residual saturations, governing equations for flow and transport. Richard's Equation for unsaturated flow. Modeling of multiphase flow.
Topics in Environmental Engineering
Courses in special topics in environmental engineering not covered by other graduate courses.
Topics in Environmental Engineering
Courses in special topics in environmental engineering not covered by other graduate courses.
Topics in Environmental Engineering
Courses in special topics in environmental engineering not covered by other graduate courses.
Topics in Environmental Engineering
Courses in special topics in environmental engineering not covered by other graduate courses.
Topics in Environmental Engineering
Courses in special topics in environmental engineering not covered by other graduate courses.
Master's Seminar
M.A.Sc. and M.Eng (project option) students in the Environmental Engineering program are required to participate in these seminar series by attending all seminars and making at least one presentation during their graduate studies.
Environmental Engineering Project
Students enrolled in the M.Eng. program by project will conduct an engineering study, analysis, or design project under the general supervision of a member of the Department.
Directed Studies 1
Prerequisite(s): open only to students in an Environmental Engineering Master's program.
Master's Thesis
Ph.D. Comprehensive Examination
Graduate students at the Doctoral level in the Environmental Engineering program are required to successfully complete a comprehensive examination which consists of a Ph.D. thesis proposal and successful defence of the proposal. Students should register in term they will defend their proposal.
Directed Studies 2
Prerequisite(s): open only to students in the Environmental Engineering Ph.D. program.
Ph.D. Thesis
Ph.D. Seminar
Ph.D. students in the Environmental Engineering program are required to participate in these seminar series by attending all seminars and making at least one presentation during their graduate studies.
Note: Not all courses listed are offered in a given year. For an up-to-date statement of course offerings for the current session and to determine the term of offering, consult the class schedule at central.carleton.ca.
Summer session: some of the courses listed in this Calendar are offered during the summer. Hours and scheduling for summer session courses will differ significantly from those reported in the fall/winter Calendar. To determine the scheduling and hours for summer session classes, consult the class schedule at central.carleton.ca
Regulations
See the General Regulations section of this Calendar.
Regularly Scheduled Break
For immigration purposes, the summer term (May to August) for the M.Eng. Environmental Engineering (coursework and project pathways) is considered a regularly scheduled break approved by the University. Students should resume full-time studies in September.
Note: a Regularly Scheduled Break as described for immigration purposes does not supersede the requirement for continuous registration in Thesis, Research Essay, or Independent Research Project as described in Section 8.2 of the Graduate General Regulations.
Admission
The requirement for admission to the master's program in Environmental Engineering is a four-year bachelor's degree in Environmental Engineering, other related engineering disciplines (Civil, Chemical, Mechanical, etc.), or Environmental Science disciplines.
All students entering the program are required to have courses in mathematics, probability and statistics equivalent to courses required in undergraduate engineering programs. Students admitted without full equivalency in these areas are expected to take appropriate undergraduate courses early in their studies. These courses will be additional to the normal degree requirements.
For applicants to the M.A.Sc. program without a bachelor’s degree in environmental, civil or chemical engineering, up to 3 undergraduate courses may be required in addition to the graduate program requirements. These may include a course in fluid mechanics, a course in environmental engineering fundamentals and a senior level undergraduate course in environmental engineering to be identified jointly by the supervisor, Associate Chair for Graduate Studies, and Director or Associate Director for OCIENE in the department.
For applicants to the MEng program without a bachelor’s degree in environmental, civil or chemical engineering, up to 3 undergraduate courses may be specified in addition to the graduate program requirements at admission by the Director or Associate Director for OCIENE in the department. These will include a course in fluid mechanics, and course in chemical/biochemical kinetics and reactors if required.
Accelerated Pathway
The accelerated pathway in Environmental Engineering is a flexible and individualized plan of graduate study. Students in the final year of Bachelor of Engineering in Civil, Environmental, or Architectural Conservation and Sustainability Engineering with demonstrated excellent aptitude for graduate studies and research may qualify for this option.
Students with a CGPA of 10.0 or higher, going into their final year of undergraduate study, and intending to apply to a Master’s degree in Environmental Engineering in the following academic year should consult with both the Undergraduate and Graduate Associate Chairs to determine if the accelerated pathway is appropriate for them and to confirm their selection of courses.
Upon approval for the accelerated pathway, students will replace a maximum of 1.0 credit of their engineering electives with 5000 level ENVE courses. Students will receive advanced standing for the approved 5000 level courses in which they receive a grade of A- or higher.
Admission
The normal requirement for admission into the Ph.D. Program in Environmental Engineering is completion of either a Master's degree in Environmental Engineering, or a Master's degree in an engineering discipline with an environmental specialization.
- Students wishing to enter the program who do not have either of these backgrounds will be evaluated on a case-by-case basis. Additional course requirements may be specified in some cases.
- Students who have been admitted to a master's program may be admitted into the Ph.D. program, without completing their master's program, if they demonstrate: (1) outstanding academic performance by completing at least 2.5 credits of course work that fulfil the breadth requirements as specified in the Master's degree requirements with a CGPA of A- or higher, and (2) significant promise for advanced research and the ability to defend their Ph.D. proposal in the first year of their Ph.D. program.