Ottawa-Carleton Institute for Mechanical and Aerospace Engineering
Minto 3090
613-520-5659
ocimae.ca
This section presents the requirements for programs in:
- M.A.Sc. Aerospace Engineering
- M.A.Sc. Materials Engineering
- M.A.Sc. Mechanical Engineering
- M.A.Sc. Aerospace Engineering with Collaborative Specialization in Climate Change
- M.A.Sc. Materials Engineering with Collaborative Specialization in Climate Change
- M.A.Sc. Mechanical Engineering with Collaborative Specialization in Climate Change
- M. Eng. Aerospace
- M. Eng. Materials
- M. Eng. Mechanical
- Ph.D. Aerospace Engineering
- Ph.D. Mechanical Engineering
Program Requirements
Students are expected to complete the master's program within the maximum limits outlined in the Section 13.2 of the General Regulations section of this Calendar.
The requirements for course work are specified in terms of credits: one credit is one hour/week for one term (thirteen weeks).
M.A.Sc. Aerospace Engineering (5.0 credits)
M.A.Sc. Materials Engineering (5.0 credits)
M.A.Sc. Mechanical Engineering (5.0 credits)
| Requirements: | ||
| 1. 2.5 credits in courses offered by the OCIMAE. | 2.5 | |
| 2. Participation in the Mechanical and Aerospace Engineering seminar series | ||
| 3. 2.5 credits in: | 2.5 | |
MECH 5909 [2.5] | M.A.Sc. Thesis | |
| Total Credits | 5.0 | |
M.A.Sc. Aerospace Engineering
with Collaborative Specialization in Climate Change (5.0 credits)
| Requirements: | ||
| 1. 1.0 credit in: | 1.0 | |
CLIM 5000 [1.0] | Climate Collaboration | |
| 2. 0.0 credit in: | ||
CLIM 5800 [0.0] | Climate Seminar Series | |
| 3. 1.5 credits in courses offered by the OCIMAE. | 1.5 | |
| 4. Participation in the Mechanical and Aerospace Engineering seminar series | ||
| 5. 2.5 credits in: | 2.5 | |
MECH 5909 [2.5] | M.A.Sc. Thesis (in the specialization) | |
| Total Credits | 5.0 | |
M.A.Sc. Materials Engineering
with Collaborative Specialization in Climate Change (5.0 credits)
| Requirements: | ||
| 1. 1.0 credit in: | 1.0 | |
CLIM 5000 [1.0] | Climate Collaboration | |
| 2. 0.0 credit in: | ||
CLIM 5800 [0.0] | Climate Seminar Series | |
| 3. 1.5 credits in courses offered by the OCIMAE. | 1.5 | |
| 4. Participation in the Mechanical and Aerospace Engineering seminar series | ||
| 5. 2.5 credits in: | 2.5 | |
MECH 5909 [2.5] | M.A.Sc. Thesis (in the specialization) | |
| Total Credits | 5.0 | |
M.A.Sc. Mechanical Engineering
with Collaborative Specialization in Climate Change (5.0 credits)
| Requirements: | ||
| 1. 1.0 credit in: | 1.0 | |
CLIM 5000 [1.0] | Climate Collaboration | |
| 2. 0.0 credit in: | ||
CLIM 5800 [0.0] | Climate Seminar Series | |
| 3. 1.5 credits in courses offered by the OCIMAE. | 1.5 | |
| 4. Participation in the Mechanical and Aerospace Engineering seminar series | ||
| 5. 2.5 credits in: | 2.5 | |
MECH 5909 [2.5] | M.A.Sc. Thesis (in the specialization) | |
| Total Credits | 5.0 | |
M. Eng. Aerospace (5.0 credits)
| Requirements: | ||
| 1. 1.5 credits from the Aerospace Restricted Course List. Up to 1.0 credit can be completed by taking courses in AERO at the 4000 level with the approval of the Associate Chair for Graduate Studies. | 1.5 | |
| 2. 3.5 credits from any graduate level course offered by the OCIMAE | 3.5 | |
| Total Credits | 5.0 | |
| Requirements by Project (Independent Study) (5.0 credits) | ||
| 1. 1.5 credits in: | 1.5 | |
MECH 5908 [1.5] | Independent Engineering Study | |
| 2. 1.5 credits from the Aerospace Restricted Course List. Up to 1.0 credit can be completed by taking courses in AERO at the 4000 level and MAAE at the 4000 level with the approval of the Associate Chair for Graduate Studies. | 1.5 | |
| 3. 2.0 credits from any graduate level course offered by the OCIMAE | 2.0 | |
| Total Credits | 5.0 | |
M. Eng. Materials (5.0 credits)
| Requirements: | ||
| 1. 1.5 credits from the Materials Restricted Course List. Up to 1.0 credit can be completed by taking courses in materials oriented MECH at the 4000 level and MAAE at the 4000 level with the approval of the Associate Chair for Graduate Studies. | 1.5 | |
| 2. 3.5 credits from any graduate level course offered by the OCIMAE | 3.5 | |
| Total Credits | 5.0 | |
| Requirements by Project (Independent Study) (5.0 credits) | ||
| 1. 1.5 credits in: | 1.5 | |
MECH 5908 [1.5] | Independent Engineering Study | |
| 2. 1.5 credits from the Materials Restricted Course List. Up to 1.0 credit can be completed by taking courses in materials oriented MECH at the 4000 level and MAAE at the 4000 level with the approval of the Associate Chair for Graduate Studies. | 1.5 | |
| 3. 2.0 credits from any graduate level course offered by the OCIMAE | 2.0 | |
| Total Credits | 5.0 | |
M. Eng. Mechanical (5.0 credits)
| Requirements: | ||
| 1. 5.0 credits from the Unrestricted Course List. Up to 1.0 credit can be completed by taking courses in MECH at the 4000 level and MAAE at the 4000 with the approval of the Associate Chair for Graduate Studies. | 5.0 | |
| Total Credits | 5.0 | |
| Requirements by Project (Independent Study) (5.0 credits) | ||
| 1. 1.5 credits in: | 1.5 | |
MECH 5908 [1.5] | Independent Engineering Study | |
| 2. 3.5 credits from the Unrestricted Course List. Up to 1.0 credit can be completed by taking courses in MECH at the 4000 level and MAAE at the 4000 level with the approval of the Associate Chair for Graduate Studies. | 3.5 | |
| Total Credits | 5.0 | |
Ph.D. Aerospace Engineering (1.5 credits)
Ph.D. Mechanical Engineering (1.5 credits)
| Requirements (from the master's degree): | ||
| (from the master's degree) | ||
| 1. 1.5 credits in courses | 1.5 | |
| 2. Participation in the Mechanical and Aerospace Engineering seminar series | ||
| 3. Successful completion of the comprehensive examination according to section 9.4 and 9.5 of the General Regulations section of this Calendar | ||
| 4. 0.0 credits in thesis. | 0.0 | |
MECH 6909 [0.0] | Ph.D. Thesis | |
| Total Credits | 1.5 | |
Graduate Courses
In addition, graduate courses offered by departments in other disciplines may be taken for credit with approval by the department in which the student is registered.
Not all of the following courses are offered in a given year.
The following codes identify the department offering the course:
- 'MECH' Department of Mechanical and Aerospace Engineering, Carleton University
- 'MAAJ' Department of Mechanical Engineering, University of Ottawa
| CARLETON UNIVERSITY | ||
| Aerospace Restricted List | ||
| MECH 5005 | Uninhabited Aircraft Systems Design | |
| MECH 5101 (MCG 5311) | Flight Dynamics and Automatic Flight Controls | |
| MECH 5103 (MCG 5328) | 3D Machine Vision: From Robots to the Space Station | |
| MECH 5105 (MCG 5315) | Orbital Mechanics and Space Control | |
| MECH 5108 | Space Robotics | |
| MECH 5106 (MCG 5121) | Space Mission Analysis and Design | |
| MECH 5301 (MCG 5331) | Aeroacoustics | |
| Materials Restricted List | ||
| MECH 5604 (AMM 5364) | Computational Metallurgy | |
| MECH 5609 (AMM 5123) | Microstructure and Properties of Materials | |
| MECH 5700 (AMM 5345) | Surfaces and Coatings | |
| MECH 5701 (AMM 5369) | Metallic Phases and Transformations | |
| Unrestricted List | ||
| MECH 5000 (MCG 5300) | Fundamentals of Fluid Dynamics | |
| MECH 5001 (MCG 5301) | Theory of Viscous Flows | |
| MECH 5003 (MCG 5303) | Incompressible Non-Viscous Flow | |
| MECH 5004 (MCG 5304) | Compressible Non-Viscous Flow | |
| MECH 5006 | Solar Energy | |
| MECH 5008 (MCG 5308) | Experimental Methods in Fluid Mechanics | |
| MECH 5009 (MCG 5309) | Environmental Fluid Mechanics Relating to Energy Utilization | |
| MECH 5107 (AMM 5317) | Experimental Stress Analysis | |
| MECH 5201 (MCG 5321) | Methods of Energy Conversion | |
| MECH 5202 (MCG 5122) | Smart Structures | |
| MECH 5203 (MCG 5322) | Nuclear Engineering | |
| MECH 5204 (MCG 5483) | Fundamentals of Combustion | |
| MECH 5205 (MCG 5324) | Building Performance Simulation | |
| MECH 5206 (MCG 5325) | Wind Engineering | |
| MECH 5300 (MCG 5330) | Engineering Acoustics | |
| MECH 5302 (MCG 5332) | Instrumentation Techniques | |
| MECH 5304 (MCG 5334) | Computational Fluid Dynamics of Compressible Flows | |
| MECH 5400 (MCG 5344) | Gas Turbine Combustion | |
| MECH 5401 (MCG 5341) | Turbomachinery | |
| MECH 5402 (MCG 5342) | Gas Turbines | |
| MECH 5403 (MCG 5343) | Advanced Thermodynamics | |
| MECH 5407 (MCG 5347) | Conductive and Radiative Heat Transfer | |
| MECH 5408 (MCG 5348) | Convective Heat and Mass Transfer | |
| MECH 5500 (MCG 5350) | Advanced Vibration Analysis | |
| MECH 5501 (MCG 5125) | Advanced Dynamics | |
| MECH 5502 (MCG 5352) | Optimal Control Systems | |
| MECH 5503 (MCG 5353) | Robotics | |
| MECH 5504 (MCG 5354) | Guidance, Navigation and Control | |
| MECH 5505 (MCG 5355) | Stability Theory and Applications | |
| MECH 5506 (MCG 5356) | Neuro and Fuzzy Control | |
| MECH 5507 (MCG 5124) | Advanced Kinematics | |
| MECH 5508 (MCG 5326) | System Modelling, Dynamics and Control | |
| MECH 5509 (MCG 5327) | Nonlinear Systems Analysis & Controls | |
| MECH 5601 (MCG 5361) | Creative Problem Solving and Design | |
| MECH 5602 (AMM 5362) | Failure Prevention (Fracture Mechanics and Fatigue) | |
| MECH 5603 (AMM 5381) | Lightweight Structures | |
| MECH 5605 (MCG 5365) | Finite Element Analysis I | |
| MECH 5606 (MCG 5366) | Finite Element Analysis II | |
| MECH 5607 (MCG 5367) | The Boundary Element Method (BEM) | |
| MECH 5704 (AMM 5374) | Integrated Manufacturing Systems (CIMS) | |
| MECH 5705 (MCG 5375) | CAD/CAM | |
| With the approval of the Department, the following courses can be placed in one of the above categories: | ||
| MECH 5800 (MCG 5480) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5801 (MCG 5489) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5802 (MCG 5483) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5803 (MCG 5488) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5804 (MCG 5384) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5805 (MCG 5482) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5806 (MCG 5486) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5807 (MCG 5487) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5808 (MCG 5376) | Special Topics in Mechanical and Aerospace Engineering | |
| MECH 5809 (MCG 5382) | Special Topics in Mechanical and Aerospace Engineering | |
| UNIVERSITY OF OTTAWA | ||
| Aerospace Restricted List | ||
| MAAJ 5010 (MCG 5310) | Performance and Economics of V/Stol Aircraft | |
| MAAJ 5031 (MCG 5331) | Aero-Acoustics | |
| MAAJ 5053 (AMM 5124) | Fatigue and Damage Tolerance in Aircraft | |
| MAAJ 5157 (MCG 5121) | Space Mission Analysis and Design | |
| Materials Restricted List | ||
| MAAJ 5003 (MCG 5103) | Theory Perfectly Plastic Solid | |
| MAAJ 5012 (AMM 5364) | Computational Metallurgy | |
| MAAJ 5052 (AMM 5122) | Failure Analysis of High-Temperature Protective Coatings for Aerospace Applications | |
| MAAJ 5100 (MCG 5110) | Micromechanics of Solids | |
| MAAJ 5107 (AMM 5117) | Intro to Composite Materials | |
| MAAJ 5108 (AMM 5118) | Introduction to Plasticity | |
| MAAJ 5206 (AMM 5126) | Deformation of Materials | |
| MAAJ 5209 (AMM 5129) | Hot Working of Metals | |
| MAAJ 5307 (AMM 5137) | Special Studies in Solid Mechanics and Materials | |
| MAAJ 5751 (AMM 5369) | Metallic Phases and Transformations | |
| Unrestricted List | ||
| MAAJ 5001 (AMM 5101) | Theory of Elasticity | |
| MAAJ 5002 (AMM 5102) | Advanced Stress Analysis | |
| MAAJ 5004 (MCG 5104) | Theory of Plates and Shells | |
| MAAJ 5005 (MCG 5105) | Continuum Mechanics | |
| MAAJ 5006 (AMM 5106) | Advanced Topics in Elasticity | |
| MAAJ 5007 (MCG 5107) | Adv. Dynamics w/Applications | |
| MAAJ 5008 (MCG 5108) | Finite Element Analysis | |
| MAAJ 5009 (MCG 5109) | Advanced Topics in Finite Element Analysis | |
| MAAJ 5013 (MCG 5125) | Advanced Dynamics | |
| MAAJ 5014 (MCG 5314) | Ground Transportation Systems and Vehicles | |
| MAAJ 5021 (MCG 5321) | Methods of Energy Conversion | |
| MAAJ 5022 (MCG 5322) | Nuclear Engineering | |
| MAAJ 5025 (MCG 5325) | Wind Engineering | |
| MAAJ 5026 (MCG 5326) | System Modelling, Dynamics and Control | |
| MAAJ 5027 (MCG 5327) | Nonlinear System Analysis and Controls | |
| MAAJ 5028 (MCG 5328) | 3D Machine Vision: From Robots to the Space Station | |
| MAAJ 5030 (MCG 5330) | Engineering Acoustics | |
| MAAJ 5042 (MCG 5342) | Gas Turbines | |
| MAAJ 5043 | Advanced Thermodynamics | |
| MAAJ 5044 | Gas Turbine Combustion | |
| MAAJ 5048 (MCG 5348) | Convective Heat and Mass Transfers | |
| MAAJ 5050 (MCG 5300) | Fundamentals of Fluid Dynamics | |
| MAAJ 5051 (AMM 5130) | Deformation and Fracture of Engineering Materials | |
| MAAJ 5054 (MCG 5147) | Finite-Volume Methods for Compressible Flows | |
| MAAJ 5055 (MCG 5148) | High-Performance Parallel Scientific Computing | |
| MAAJ 5056 (AMM 5125) | Materials Characterization Techniques | |
| MAAJ 5057 (AMM 5121) | Materials Selection in Engineering Design | |
| MAAJ 5058 (MCG 5149) | Non-Equilibrium Gas Dynamics | |
| MAAJ 5059 (MCG 5309) | Environmental Fluid Mechanics | |
| MAAJ 5101 (MCG 5111) | Gas Dynamics | |
| MAAJ 5102 (AMM 5317) | Experimental Stress Analysis | |
| MAAJ 5103 (AMM 5374) | Integrated Manufacturing - CIMS | |
| MAAJ 5105 (MCG 5115) | Non-Linear Optimization | |
| MAAJ 5109 (AMM 5119) | Fracture Mechanics | |
| MAAJ 5122 (MCG 5352) | Optimal Control Systems | |
| MAAJ 5123 (MCG 5353) | Robotics | |
| MAAJ 5151 (MCG 5311) | Dynamics and Aerodynamics of Flight | |
| MAAJ 5152 (MCG 5301) | Theory of Viscous Flows | |
| MAAJ 5153 (MCG 5303) | Incompressible Non-Viscous Flows | |
| MAAJ 5154 (MCG 5304) | Compressible Non-Viscous Flows | |
| MAAJ 5155 (MCG 5315) | Orbital Mechanics and Space Control | |
| MAAJ 5156 (AMM 5381) | Lightweight Structures | |
| MAAJ 5158 (MCG 5308) | Experimental Methods in Fluid Mechanics | |
| MAAJ 5159 (MCG 5122) | Smart Structures | |
| MAAJ 5251 (MCG 5354) | Guidance, Navigation and Control | |
| MAAJ 5252 (MCG 5356) | Neuro and Fuzzy Control | |
| MAAJ 5253 (MCG 5366) | Finite Element Analysis II | |
| MAAJ 5254 (MCG 5483) | Fundamentals of Combustion | |
| MAAJ 5255 (MCG 5324) | Building Performance Simulation | |
| MAAJ 5301 (MCG 5131) | Heat Transfer by Conduction | |
| MAAJ 5302 (MCG 5132) | Heat Transfer by Convection | |
| MAAJ 5303 (MCG 5133) | Heat Transfer by Radiation | |
| MAAJ 5304 (MCG 5134) | Heat Transfer w/Phase Change | |
| MAAJ 5305 (MCG 5343) | Advanced Thermodynamics | |
| MAAJ 5306 (MCG 5136) | Special Studies in Fluid Mech and Heat Transfer | |
| MAAJ 5309 (MCG 5375) | CAD/CAM | |
| MAAJ 5340 (MCG 5344) | Gas Turbine Combustion | |
| MAAJ 5352 (MCG 5332) | Instrumentation Techniques | |
| MAAJ 5354 (MCG 5334) | Computational Fluid Dynamics of Compressible Flow | |
| MAAJ 5356 (MCG 5306) | Theory of Subsonic Flows | |
| MAAJ 5357 (MCG 5307) | Theory of Supersonic Flows | |
| MAAJ 5401 (MCG 5141) | Statistical Thermodynamics | |
| MAAJ 5408 (MCG 5551) | Theorie d'Ecoulement Visqueux | |
| MAAJ 5451 (MCG 5341) | Turbomachinery | |
| MAAJ 5452 (AMM 5144) | Superalloys and Ceramix-Metal Matrix Composites | |
| MAAJ 5457 (MCG 5347) | Conductive and Radiative Heat Transfer | |
| MAAJ 5459 (MCG 5349) | Two-Phase Flow and Heat Transfer | |
| MAAJ 5509 (AMM 5159) | Advanced Production Planning and Control | |
| MAAJ 5550 (MCG 5350) | Advanced Vibration Analysis | |
| MAAJ 5555 (MCG 5355) | Stability Theory & Application | |
| MAAJ 5557 (MCG 5124) | Advanced Kinematics | |
| MAAJ 5607 (MCG 5167) | Nuclear Reactor Engineering | |
| MAAJ 5608 (AMM 5168) | Industrial Organization | |
| MAAJ 5609 (MCG 5169) | Advanced Topics in Reliability Engineer | |
| MAAJ 5652 (AMM 5362) | Failure Prevention | |
| MAAJ 5655 (MCG 5365) | Finite Element Analysis I | |
| MAAJ 5656 (MCG 5367) | The Boundary Element Method | |
| MAAJ 5657 (MCG 5361) | Creative Problem Solving and Design | |
| MAAJ 5659 (AMM 5123) | Microstructure and Properties of Materials | |
| MAAJ 5701 (MCG 5171) | Applied Reliability Theory | |
| MAAJ 5703 (MCG 5173) | Systems Engineer and Integration | |
| MAAJ 5707 (MCG 5177) | Robot Mechanics | |
| MAAJ 5709 (AMM 5179) | Manufacturing System Analysis | |
| MAAJ 5802 (AMM 5182) | Theory of Elastic Instability | |
| MAAJ 5804 (MCG 5184) | Mechatronics | |
| MAAJ 5409 (MCG 5552) | Theorie de Turbulence | |
| MAAJ 5500 (MCG 5557) | Méthodes numeriques en mécanique | |
| MAAJ 5501 (MCG 5151) | Laminar Flow Theory | |
| MAAJ 5502 (MCG 5152) | Theory of Turbulance | |
| MAAJ 5505 (MCG 5155) | Inviscid Flow Theory | |
| MAAJ 5506 (MCG 5156) | Measurement of Fluid Mech | |
| MAAJ 5507 (MCG 5157) | Num Comp:Fluid Dyn and Heat Tran | |
| MAAJ 5700 (MCG 5170) | Computer-Aided Design | |
| MAAJ 5750 (AMM 5345) | Surfaces and Coatings | |
| MAAJ 5805 (MCG 5185) | Multivariable Digital Control | |
| MAAJ 5806 (MCG 5186) | Non-Linear Disc Dyn and Control | |
| MAAJ 5851 (MCG 5380) | Safety and Risk Assessment of Nuclear Power | |
| MAAJ 5901 (MCG 5191) | Combustion in Premixed Systems | |
| MAAJ 5902 (MCG 5192) | Combustion in Diffusion System | |
| With the approval of the Department, the following courses can be placed in one of the above categories: | ||
| MAAJ 5011 (AMM 5138) | Advanced Topics in Advanced Materials and Manufacturing | |
| MAAJ 5308 (MCG 5138) | Advanced Topics in Mechanical Engineering | |
| MAAJ 5310 | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5311 (MCG 5471) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5312 (MCG 5472) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5313 (MCG 5473) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5314 (MCG 5474) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5315 (MCG 5475) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5316 (MCG 5476) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5317 (MCG 5477) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5318 (MCG 5478) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5319 (MCG 5479) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5402 (MCG 5370) | Special Topics in Mechanical and Aeronautical Engineering | |
| MAAJ 5403 (MCG 5470) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5852 (MCG 5483) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5853 (MCG 5488) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5854 (MCG 5384) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5855 (MCG 5482) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5857 (MCG 5487) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5858 (MCG 5376) | Special Topics in Mechanical and Aerospace Engineering | |
| MAAJ 5850 (MCG 5480) | Special Topics in Mechanical and Aerospace Engineering | |
Mechanical and Aerospace Engineering (Joint) (MAAJ) Courses
MAAJ 5001 [0.5 credit] (AMM 5101)
Theory of Elasticity
Theory of Elasticity
MAAJ 5002 [0.5 credit] (AMM 5102)
Advanced Stress Analysis
Advanced Stress Analysis
MAAJ 5003 [0.5 credit] (AMM 5103)
Theory Perfectly Plastic Solid
Theory Perfectly Plastic Solid
MAAJ 5004 [0.5 credit] (MCG 5104)
Theory of Plates and Shells
Theory of Plates and Shells
MAAJ 5005 [0.5 credit] (MCG 5105)
Continuum Mechanics
Continuum Mechanics
MAAJ 5006 [0.5 credit] (AMM 5106)
Advanced Topics in Elasticity
Advanced Topics in Elasticity
MAAJ 5007 [0.5 credit] (MCG 5107)
Adv. Dynamics w/Applications
Adv. Dynamics w/Applications
MAAJ 5008 [0.5 credit] (MCG 5108)
Finite Element Analysis
Finite Element Analysis
MAAJ 5009 [0.5 credit] (MCG 5109)
Advanced Topics in Finite Element Analysis
Advanced Topics in Finite Element Analysis
MAAJ 5010 [0.5 credit] (MCG 5310)
Performance and Economics of V/Stol Aircraft
Performance and Economics of V/Stol Aircraft
MAAJ 5011 [0.5 credit] (AMM 5138)
Advanced Topics in Advanced Materials and Manufacturing
Advanced Topics in Advanced Materials and Manufacturing
MAAJ 5012 [0.5 credit] (AMM 5364)
Computational Metallurgy
Computational Metallurgy
MAAJ 5013 [0.5 credit] (MCG 5125)
Advanced Dynamics
Advanced Dynamics
MAAJ 5014 [0.5 credit] (MCG 5314)
Ground Transportation Systems and Vehicles
Ground Transportation Systems and Vehicles
MAAJ 5021 [0.5 credit] (MCG 5321)
Methods of Energy Conversion
Methods of Energy Conversion
MAAJ 5022 [0.5 credit] (MCG 5322)
Nuclear Engineering
Nuclear Engineering
MAAJ 5025 [0.5 credit] (MCG 5325)
Wind Engineering
Wind Engineering
MAAJ 5026 [0.5 credit] (MCG 5326)
System Modelling, Dynamics and Control
System Modelling, Dynamics and Control
MAAJ 5027 [0.5 credit] (MCG 5327)
Nonlinear System Analysis and Controls
Nonlinear System Analysis and Controls
MAAJ 5028 [0.5 credit] (MCG 5328)
3D Machine Vision: From Robots to the Space Station
3D Machine Vision: From Robots to the Space Station
MAAJ 5030 [0.5 credit] (MCG 5330)
Engineering Acoustics
Engineering Acoustics
MAAJ 5031 [0.5 credit] (MCG 5331)
Aero-Acoustics
Aero-Acoustics
MAAJ 5042 [0.5 credit] (MCG 5342)
Gas Turbines
Gas Turbines
MAAJ 5048 [0.5 credit] (MCG 5348)
Convective Heat and Mass Transfers
Convective Heat and Mass Transfers
MAAJ 5051 [0.5 credit] (AMM 5130)
Deformation and Fracture of Engineering Materials
Deformation and Fracture of Engineering Materials
MAAJ 5052 [0.5 credit] (AMM 5122)
Failure Analysis of High-Temperature Protective Coatings for Aerospace Applications
Failure Analysis of High-Temperature Protective Coatings for Aerospace Applications
MAAJ 5053 [0.5 credit] (AMM 5124)
Fatigue and Damage Tolerance in Aircraft
Fatigue and Damage Tolerance in Aircraft
MAAJ 5054 [0.5 credit] (MCG 5147)
Finite-Volume Methods for Compressible Flows
Finite-Volume Methods for Compressible Flows
MAAJ 5055 [0.5 credit] (MCG 5148)
High-Performance Parallel Scientific Computing
High-Performance Parallel Scientific Computing
MAAJ 5056 [0.5 credit] (AMM 5125)
Materials Characterization Techniques
Materials Characterization Techniques
MAAJ 5057 [0.5 credit] (AMM 5121)
Materials Selection in Engineering Design
Materials Selection in Engineering Design
MAAJ 5058 [0.5 credit] (MCG 5149)
Non-Equilibrium Gas Dynamics
Non-Equilibrium Gas Dynamics
MAAJ 5059 [0.5 credit] (MCG 5309)
Environmental Fluid Mechanics
Environmental Fluid Mechanics
MAAJ 5100 [0.5 credit] (MCG 5110)
Micromechanics of Solids
Micromechanics of Solids
MAAJ 5101 [0.5 credit] (MCG 5111)
Gas Dynamics
Gas Dynamics
MAAJ 5102 [0.5 credit] (AMM 5317)
Experimental Stress Analysis
Experimental Stress Analysis
MAAJ 5103 [0.5 credit] (AMM 5374)
Integrated Manufacturing - CIMS
Integrated Manufacturing - CIMS
MAAJ 5105 [0.5 credit] (MCG 5115)
Non-Linear Optimization
Non-Linear Optimization
MAAJ 5107 [0.5 credit] (AMM 5117)
Intro to Composite Materials
Intro to Composite Materials
Includes: Experiential Learning Activity
MAAJ 5108 [0.5 credit] (AMM 5118)
Introduction to Plasticity
Introduction to Plasticity
MAAJ 5109 [0.5 credit] (AMM 5119)
Fracture Mechanics
Fracture Mechanics
MAAJ 5122 [0.5 credit] (MCG 5352)
Optimal Control Systems
Optimal Control Systems
MAAJ 5123 [0.5 credit] (MCG 5353)
Robotics
Robotics
MAAJ 5151 [0.5 credit] (MCG 5311)
Dynamics and Aerodynamics of Flight
Dynamics and Aerodynamics of Flight
MAAJ 5152 [0.5 credit] (MCG 5301)
Theory of Viscous Flows
Theory of Viscous Flows
MAAJ 5153 [0.5 credit] (MCG 5303)
Incompressible Non-Viscous Flows
Incompressible Non-Viscous Flows
MAAJ 5154 [0.5 credit] (MCG 5304)
Compressible Non-Viscous Flows
Compressible Non-Viscous Flows
MAAJ 5155 [0.5 credit] (MCG 5315)
Orbital Mechanics and Space Control
Orbital Mechanics and Space Control
MAAJ 5156 [0.5 credit] (AMM 5381)
Lightweight Structures
Lightweight Structures
MAAJ 5157 [0.5 credit] (MCG 5121)
Space Mission Analysis and Design
Space Mission Analysis and Design
MAAJ 5158 [0.5 credit] (MCG 5308)
Experimental Methods in Fluid Mechanics
Experimental Methods in Fluid Mechanics
MAAJ 5159 [0.5 credit] (MCG 5122)
Smart Structures
Smart Structures
MAAJ 5206 [0.5 credit] (AMM 5126)
Deformation of Materials
Deformation of Materials
MAAJ 5209 [0.5 credit] (AMM 5129)
Hot Working of Metals
Hot Working of Metals
MAAJ 5251 [0.5 credit] (MCG 5354)
Guidance, Navigation and Control
Guidance, Navigation and Control
MAAJ 5252 [0.5 credit] (MCG 5356)
Neuro and Fuzzy Control
Neuro and Fuzzy Control
MAAJ 5253 [0.5 credit] (MCG 5366)
Finite Element Analysis II
Finite Element Analysis II
MAAJ 5255 [0.5 credit] (MCG 5324)
Building Performance Simulation
Building Performance Simulation
MAAJ 5301 [0.5 credit] (MCG 5131)
Heat Transfer by Conduction
Heat Transfer by Conduction
MAAJ 5302 [0.5 credit] (MCG 5132)
Heat Transfer by Convection
Heat Transfer by Convection
MAAJ 5303 [0.5 credit] (MCG 5133)
Heat Transfer by Radiation
Heat Transfer by Radiation
MAAJ 5304 [0.5 credit] (MCG 5134)
Heat Transfer w/Phase Change
Heat Transfer w/Phase Change
MAAJ 5305 [0.5 credit] (MCG 5343)
Advanced Thermodynamics
Advanced Thermodynamics
MAAJ 5306 [0.5 credit] (MCG 5136)
Special Studies in Fluid Mech and Heat Transfer
Special Studies in Fluid Mech and Heat Transfer
MAAJ 5307 [0.5 credit] (AMM 5137)
Special Studies in Solid Mechanics and Materials
Special Studies in Solid Mechanics and Materials
MAAJ 5308 [0.5 credit] (MCG 5138)
Advanced Topics in Mechanical Engineering
Advanced Topics in Mechanical Engineering
MAAJ 5309 [0.5 credit] (MCG 5375)
CAD/CAM
CAD/CAM
MAAJ 5311 [0.5 credit] (MCG 5471)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
MAAJ 5312 [0.5 credit] (MCG 5472)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
MAAJ 5313 [0.5 credit] (MCG 5473)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
MAAJ 5314 [0.5 credit] (MCG 5474)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
MAAJ 5315 [0.5 credit] (MCG 5475)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
MAAJ 5316 [0.5 credit] (MCG 5476)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
MAAJ 5317 [0.5 credit] (MCG 5477)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
MAAJ 5318 [0.5 credit] (MCG 5478)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
MAAJ 5319 [0.5 credit] (MCG 5479)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
MAAJ 5340 [0.5 credit] (MCG 5344)
Gas Turbine Combustion
Gas Turbine Combustion
MAAJ 5354 [0.5 credit] (MCG 5334)
Computational Fluid Dynamics of Compressible Flow
Computational Fluid Dynamics of Compressible Flow
Also listed as MECH 5304.
MAAJ 5356 [0.5 credit] (MCG 5306)
Theory of Subsonic Flows
Theory of Subsonic Flows
MAAJ 5357 [0.5 credit] (MCG 5307)
Theory of Supersonic Flows
Theory of Supersonic Flows
MAAJ 5401 [0.5 credit] (MCG 5141)
Statistical Thermodynamics
Statistical Thermodynamics
MAAJ 5402 [0.5 credit] (MCG 5370)
Special Topics in Mechanical and Aeronautical Engineering
Special Topics in Mechanical and Aeronautical Engineering
MAAJ 5403 [0.5 credit] (MCG 5470)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
MAAJ 5408 [0.5 credit] (MCG 5551)
Theorie d'Ecoulement Visqueux
Theorie d'Ecoulement Visqueux
MAAJ 5409 [0.5 credit] (MCG 5552)
Theorie de Turbulence
Theorie de Turbulence
MAAJ 5451 [0.5 credit] (MCG 5341)
Turbomachinery
Turbomachinery
MAAJ 5452 [0.5 credit] (AMM 5144)
Superalloys and Ceramix-Metal Matrix Composites
Superalloys and Ceramix-Metal Matrix Composites
MAAJ 5459 [0.5 credit] (MCG 5349)
Two-Phase Flow and Heat Transfer
Two-Phase Flow and Heat Transfer
MAAJ 5500 [0.5 credit] (MCG 5557)
Méthodes numeriques en mécanique
Méthodes numeriques en mécanique
MAAJ 5501 [0.5 credit] (MCG 5151)
Laminar Flow Theory
Laminar Flow Theory
MAAJ 5502 [0.5 credit] (MCG 5152)
Theory of Turbulance
Theory of Turbulance
MAAJ 5505 [0.5 credit] (MCG 5155)
Inviscid Flow Theory
Inviscid Flow Theory
MAAJ 5506 [0.5 credit] (MCG 5156)
Measurement of Fluid Mech
Measurement of Fluid Mech
MAAJ 5507 [0.5 credit] (MCG 5157)
Num Comp:Fluid Dyn and Heat Tran
Num Comp:Fluid Dyn and Heat Tran
MAAJ 5509 [0.5 credit] (AMM 5159)
Advanced Production Planning and Control
Advanced Production Planning and Control
MAAJ 5550 [0.5 credit] (MCG 5350)
Advanced Vibration Analysis
Advanced Vibration Analysis
MAAJ 5557 [0.5 credit] (MCG 5124)
Advanced Kinematics
Advanced Kinematics
MAAJ 5607 [0.5 credit] (MCG 5167)
Nuclear Reactor Engineering
Nuclear Reactor Engineering
MAAJ 5608 [0.5 credit] (AMM 5168)
Industrial Organization
Industrial Organization
MAAJ 5609 [0.5 credit] (MCG 5169)
Advanced Topics in Reliability Engineer
Advanced Topics in Reliability Engineer
MAAJ 5652 [0.5 credit] (AMM 5362)
Failure Prevention
Failure Prevention
MAAJ 5656 [0.5 credit] (MCG 5367)
The Boundary Element Method
The Boundary Element Method
MAAJ 5659 [0.5 credit] (AMM 5123)
Microstructure and Properties of Materials
Microstructure and Properties of Materials
Also listed as MECH 5609.
MAAJ 5700 [0.5 credit] (MCG 5170)
Computer-Aided Design
Computer-Aided Design
Includes: Experiential Learning Activity
MAAJ 5701 [0.5 credit] (MCG 5171)
Applied Reliability Theory
Applied Reliability Theory
MAAJ 5703 [0.5 credit] (MCG 5173)
Systems Engineer and Integration
Systems Engineer and Integration
MAAJ 5707 [0.5 credit] (MCG 5177)
Robot Mechanics
Robot Mechanics
MAAJ 5709 [0.5 credit] (AMM 5179)
Manufacturing System Analysis
Manufacturing System Analysis
MAAJ 5751 [0.5 credit] (AMM 5369)
Metallic Phases and Transformations
Metallic Phases and Transformations
Precludes additional credit for MECH 5701.
MAAJ 5802 [0.5 credit] (AMM 5182)
Theory of Elastic Instability
Theory of Elastic Instability
MAAJ 5804 [0.5 credit] (MCG 5184)
Mechatronics
Mechatronics
MAAJ 5805 [0.5 credit] (MCG 5185)
Multivariable Digital Control
Multivariable Digital Control
MAAJ 5806 [0.5 credit] (MCG 5186)
Non-Linear Disc Dyn and Control
Non-Linear Disc Dyn and Control
MAAJ 5850 [0.5 credit] (MCG 5480)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
Also listed as MECH 5800.
MAAJ 5851 [0.5 credit] (MCG 5380)
Safety and Risk Assessment of Nuclear Power
Safety and Risk Assessment of Nuclear Power
MAAJ 5852 [0.5 credit] (MCG 5483)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
Also listed as MECH 5802.
MAAJ 5853 [0.5 credit] (MCG 5488)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
Also listed as MECH 5803.
MAAJ 5854 [0.5 credit] (MCG 5384)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
Also listed as MECH 5804.
MAAJ 5855 [0.5 credit] (MCG 5482)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
Also listed as MECH 5805.
MAAJ 5857 [0.5 credit] (MCG 5487)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
Also listed as MECH 5807.
MAAJ 5858 [0.5 credit] (MCG 5376)
Special Topics in Mechanical and Aerospace Engineering
Special Topics in Mechanical and Aerospace Engineering
Also listed as MECH 5808.
MAAJ 5901 [0.5 credit] (MCG 5191)
Combustion in Premixed Systems
Combustion in Premixed Systems
MAAJ 5902 [0.5 credit] (MCG 5192)
Combustion in Diffusion System
Combustion in Diffusion System
Mechanical Engineering (MECH) Courses
MECH 5000 [0.5 credit] (MCG 5300)
Fundamentals of Fluid Dynamics
Differential equations of motion. Viscous and inviscid regions. Potential flow: superposition; thin airfoils; finite wings; compressibility corrections. Viscous flow: thin shear layer approximation; laminar layers; transition; turbulence modeling. Convective heat transfer: free versus forced convection; energy and energy integral equations; turbulent diffusion.
Fundamentals of Fluid Dynamics
Differential equations of motion. Viscous and inviscid regions. Potential flow: superposition; thin airfoils; finite wings; compressibility corrections. Viscous flow: thin shear layer approximation; laminar layers; transition; turbulence modeling. Convective heat transfer: free versus forced convection; energy and energy integral equations; turbulent diffusion.
Also listed as MAAJ 5050.
MECH 5001 [0.5 credit] (MCG 5301)
Theory of Viscous Flows
Navier-Stokes and boundary layer equations; mean flow equations for turbulent kinetic energy; integral formulations. Stability, transition, turbulence, Reynolds stresses; separation. Calculation methods, closure schemes. Compressibility, heat transfer, and three-dimensional effects.
Theory of Viscous Flows
Navier-Stokes and boundary layer equations; mean flow equations for turbulent kinetic energy; integral formulations. Stability, transition, turbulence, Reynolds stresses; separation. Calculation methods, closure schemes. Compressibility, heat transfer, and three-dimensional effects.
Includes: Experiential Learning Activity
MECH 5003 [0.5 credit] (MCG 5303)
Incompressible Non-Viscous Flow
The fundamental equations and theorems for non-viscous fluid flow; solution of two-dimensional and axisymmetric potential flows; low-speed airfoil and cascade theory; wing lifting-line theory; panel methods.
Incompressible Non-Viscous Flow
The fundamental equations and theorems for non-viscous fluid flow; solution of two-dimensional and axisymmetric potential flows; low-speed airfoil and cascade theory; wing lifting-line theory; panel methods.
MECH 5004 [0.5 credit] (MCG 5304)
Compressible Non-Viscous Flow
Steady isentropic, frictional, and diabatic flow; shock waves; irrotational compressible flow, small perturbation theory and similarity rules; second-order theory and unsteady, one-dimensional flow.
Compressible Non-Viscous Flow
Steady isentropic, frictional, and diabatic flow; shock waves; irrotational compressible flow, small perturbation theory and similarity rules; second-order theory and unsteady, one-dimensional flow.
MECH 5005 [0.5 credit]
Uninhabited Aircraft Systems Design
Theory of flight and air vehicle performance; propulsion systems; launch and recovery. Regulatory development; privacy policies. Mission design; sensor performance. Guidance, navigation, control and communications theory. System-level reliability; life cycle cost assessment.
Uninhabited Aircraft Systems Design
Theory of flight and air vehicle performance; propulsion systems; launch and recovery. Regulatory development; privacy policies. Mission design; sensor performance. Guidance, navigation, control and communications theory. System-level reliability; life cycle cost assessment.
Includes: Experiential Learning Activity
MECH 5006 [0.5 credit]
Solar Energy
This course will take an in-depth look at solar radiation fundamentals, solar collector design and performance, heat transfer characteristics of solar collectors, energy storage, passive and active thermal systems, photovoltaics and applications of solar energy for collection and utilization.
Solar Energy
This course will take an in-depth look at solar radiation fundamentals, solar collector design and performance, heat transfer characteristics of solar collectors, energy storage, passive and active thermal systems, photovoltaics and applications of solar energy for collection and utilization.
MECH 5008 [0.5 credit] (MCG 5308)
Experimental Methods in Fluid Mechanics
Fundamentals of techniques of simulation of fluid dynamic phenomena. Theoretical basis, principles of design, performance and instrumentation of ground test facilities. Applications to aerodynamic testing.
Experimental Methods in Fluid Mechanics
Fundamentals of techniques of simulation of fluid dynamic phenomena. Theoretical basis, principles of design, performance and instrumentation of ground test facilities. Applications to aerodynamic testing.
Includes: Experiential Learning Activity
MECH 5009 [0.5 credit] (MCG 5309)
Environmental Fluid Mechanics Relating to Energy Utilization
Characteristics of energy sources and emissions into the environment. The atmosphere; stratification and stability, equations of motion, simple winds, mean flow, turbulence structure and dispersion near the ground. Flow and dispersion in groundwater, rivers, lakes and oceans. Physical and analytical modeling of environmental flows.
Environmental Fluid Mechanics Relating to Energy Utilization
Characteristics of energy sources and emissions into the environment. The atmosphere; stratification and stability, equations of motion, simple winds, mean flow, turbulence structure and dispersion near the ground. Flow and dispersion in groundwater, rivers, lakes and oceans. Physical and analytical modeling of environmental flows.
MECH 5101 [0.5 credit] (MCG 5311)
Flight Dynamics and Automatic Flight Controls
Aircraft nonlinear equations of motion and their linearization; effect of stability and control derivatives on the open-loop dynamics response; autopilot design and aircraft stability and control augmentation; pilot-in-the-loop; aeroelastic effects on stability and control.
Flight Dynamics and Automatic Flight Controls
Aircraft nonlinear equations of motion and their linearization; effect of stability and control derivatives on the open-loop dynamics response; autopilot design and aircraft stability and control augmentation; pilot-in-the-loop; aeroelastic effects on stability and control.
MECH 5103 [0.5 credit] (MCG 5328)
3D Machine Vision: From Robots to the Space Station
Through lectures and project work, this course introduces fundamental 3D machine vision methods (triangulation and time-of-flight), presents cutting-edge neural network approaches, and explores major engineering applications (e.g. robotics, autonomous vehicles, space navigation) where perception of the 3D environment is essential.
3D Machine Vision: From Robots to the Space Station
Through lectures and project work, this course introduces fundamental 3D machine vision methods (triangulation and time-of-flight), presents cutting-edge neural network approaches, and explores major engineering applications (e.g. robotics, autonomous vehicles, space navigation) where perception of the 3D environment is essential.
MECH 5105 [0.5 credit] (MCG 5315)
Orbital Mechanics and Space Control
Orbital dynamics and perturbations due to the Earth's figure, the sun, and the moon with emphasis on mission planning and analysis. Rigid body dynamics applied to transfer orbit and on-orbit momentum management and control of spacecraft. Effects of flexible structures on a spacecraft control system.
Orbital Mechanics and Space Control
Orbital dynamics and perturbations due to the Earth's figure, the sun, and the moon with emphasis on mission planning and analysis. Rigid body dynamics applied to transfer orbit and on-orbit momentum management and control of spacecraft. Effects of flexible structures on a spacecraft control system.
MECH 5106 [0.5 credit] (MCG 5121)
Space Mission Analysis and Design
Review of solar system and space exploration. Space mission design and geometry. Analysis of orbit design, transfers, interplanetary trajectories. Effect of environment on spacecraft design. Space propulsion and launch vehicle design. Launch sequence, windows, cost. Reusable launch systems.
Space Mission Analysis and Design
Review of solar system and space exploration. Space mission design and geometry. Analysis of orbit design, transfers, interplanetary trajectories. Effect of environment on spacecraft design. Space propulsion and launch vehicle design. Launch sequence, windows, cost. Reusable launch systems.
MECH 5107 [0.5 credit] (AMM 5317)
Experimental Stress Analysis
Introduction to theory of elasticity. Photo-elasticity: types of polariscopes, two- and three-dimensional stress fields, frozen patterns. Photoelastic coatings. Strain gauges; gauge factors, sensitivity, calibration, and temperature compensation. Moire fringes, brittle lacquers, mechanical strain gauges.
Experimental Stress Analysis
Introduction to theory of elasticity. Photo-elasticity: types of polariscopes, two- and three-dimensional stress fields, frozen patterns. Photoelastic coatings. Strain gauges; gauge factors, sensitivity, calibration, and temperature compensation. Moire fringes, brittle lacquers, mechanical strain gauges.
MECH 5108 [0.5 credit] (MCG 5329)
Space Robotics
This course covers the full spectrum of manipulator robotics applied to in-orbit servicing, repair of spacecraft and removal of orbital debris as the first step towards developing a space infrastructure. It covers space manipulator missions, kinematics, dynamics, trajectory generation, control systems, and some special topics.
Space Robotics
This course covers the full spectrum of manipulator robotics applied to in-orbit servicing, repair of spacecraft and removal of orbital debris as the first step towards developing a space infrastructure. It covers space manipulator missions, kinematics, dynamics, trajectory generation, control systems, and some special topics.
MECH 5201 [0.5 credit] (MCG 5321)
Methods of Energy Conversion
Technical, economic and environmental aspects of present and proposed large-scale systems of energy conversion.
Methods of Energy Conversion
Technical, economic and environmental aspects of present and proposed large-scale systems of energy conversion.
MECH 5202 [0.5 credit] (MCG 5122)
Smart Structures
An introduction to the fundamentals of smart materials and structures: mechanisms and classification of the smart materials; their fundamental characteristics and operating principals; sensors and actuators design; design framework of smart structures; control experimentation of smart structures; application case studies.
Smart Structures
An introduction to the fundamentals of smart materials and structures: mechanisms and classification of the smart materials; their fundamental characteristics and operating principals; sensors and actuators design; design framework of smart structures; control experimentation of smart structures; application case studies.
Prerequisite(s): permission of the department.
MECH 5203 [0.5 credit] (MCG 5322)
Nuclear Engineering
Reactor design and safety requirement overview; reactor physics, chemistry and engineering, CANDU reactor design and operation; CANDU reactor fuel channels, thermalhydraulics and fuel; reactor safety design and analysis; IAEA and Canadian safety analysis requirements; reactor accidents; nuclear energy policy.
Nuclear Engineering
Reactor design and safety requirement overview; reactor physics, chemistry and engineering, CANDU reactor design and operation; CANDU reactor fuel channels, thermalhydraulics and fuel; reactor safety design and analysis; IAEA and Canadian safety analysis requirements; reactor accidents; nuclear energy policy.
MECH 5204 [0.5 credit] (MCG 5483)
Fundamentals of Combustion
Emphasis on gas phase reacting flows. Background of combustion thermodynamics, diffusion mass transfer, and chemical kinetics. Detonations and deflagrations. Chemical and dynamic structure of flames. Gaseous flame propagation under laminar and turbulent conditions. Flame stabilization and extinction. Introduction to burning rate theory.
Fundamentals of Combustion
Emphasis on gas phase reacting flows. Background of combustion thermodynamics, diffusion mass transfer, and chemical kinetics. Detonations and deflagrations. Chemical and dynamic structure of flames. Gaseous flame propagation under laminar and turbulent conditions. Flame stabilization and extinction. Introduction to burning rate theory.
MECH 5205 [0.5 credit] (MCG 5324)
Building Performance Simulation
During this course students will develop an understanding of the methodologies and theory employed historically and contemporarily in the Building Performance Simulation (BPS) field, develop capabilities for extending the functionality of BPS tools, and establish skills in applying BPS tools in research, analysis, and design.
Building Performance Simulation
During this course students will develop an understanding of the methodologies and theory employed historically and contemporarily in the Building Performance Simulation (BPS) field, develop capabilities for extending the functionality of BPS tools, and establish skills in applying BPS tools in research, analysis, and design.
MECH 5206 [0.5 credit] (MCG 5325)
Wind Engineering
Theoretical and practical areas pertinent to the operation of wind turbines. World energy needs, wind farms versus traditional power plants, global wind characteristics, efficient turbine design, electrical components, modes of turbine operation and control, mechanical design, economic and environmental concerns.
Wind Engineering
Theoretical and practical areas pertinent to the operation of wind turbines. World energy needs, wind farms versus traditional power plants, global wind characteristics, efficient turbine design, electrical components, modes of turbine operation and control, mechanical design, economic and environmental concerns.
MECH 5300 [0.5 credit] (MCG 5330)
Engineering Acoustics
Review of acoustic waves in compressible fluids; acoustic pressure, intensity and impedance; physical interpretation and measurement; transmission through media; layers, in-homogeneous media, solids; acoustic systems; rooms, ducts, resonators, mufflers, properties of transducers; microphones, loudspeakers, computational acoustics.
Engineering Acoustics
Review of acoustic waves in compressible fluids; acoustic pressure, intensity and impedance; physical interpretation and measurement; transmission through media; layers, in-homogeneous media, solids; acoustic systems; rooms, ducts, resonators, mufflers, properties of transducers; microphones, loudspeakers, computational acoustics.
MECH 5301 [0.5 credit] (MCG 5331)
Aeroacoustics
The convected wave equation; theory of subsonic and supersonic jet noise; propeller and helicopter noise; fan and compressor noise; boundary layer noise, interior noise; propagation in the atmosphere; sonic boom; impact on environment.
Aeroacoustics
The convected wave equation; theory of subsonic and supersonic jet noise; propeller and helicopter noise; fan and compressor noise; boundary layer noise, interior noise; propagation in the atmosphere; sonic boom; impact on environment.
Includes: Experiential Learning Activity
MECH 5302 [0.5 credit] (MCG 5332)
Instrumentation Techniques
An introduction for the non-specialists to the concepts of digital and analog electronics with emphasis on data acquisition, processing and analysis. Topics covered include operational amplifiers, signal processing, digital logic systems, computer interfacing, noise in electronic systems. Hands-on sessions illustrate theory and practice.
Instrumentation Techniques
An introduction for the non-specialists to the concepts of digital and analog electronics with emphasis on data acquisition, processing and analysis. Topics covered include operational amplifiers, signal processing, digital logic systems, computer interfacing, noise in electronic systems. Hands-on sessions illustrate theory and practice.
Also listed as MAAJ 5352.
MECH 5304 [0.5 credit] (MCG 5334)
Computational Fluid Dynamics of Compressible Flows
Solution techniques for parabolic, elliptic and hyperbolic equations developed for problems of interest to fluid dynamics with appropriate stability considerations. A staged approach to solution of full Euler and Navier-Stokes equations is used. Grid generation techniques appropriate for compressible flows are introduced.
Computational Fluid Dynamics of Compressible Flows
Solution techniques for parabolic, elliptic and hyperbolic equations developed for problems of interest to fluid dynamics with appropriate stability considerations. A staged approach to solution of full Euler and Navier-Stokes equations is used. Grid generation techniques appropriate for compressible flows are introduced.
Also listed as MAAJ 5354.
MECH 5400 [0.5 credit] (MCG 5344)
Gas Turbine Combustion
Combustion fundamentals and gas turbine combustor design. Combustion fundamentals include fuel evaporation, chemistry of combustion, chemical kinetics and emissions formation and introduction to computational combustion modelling. Combustor design addresses the interrelationship between operational requirements and combustion fundamentals.
Gas Turbine Combustion
Combustion fundamentals and gas turbine combustor design. Combustion fundamentals include fuel evaporation, chemistry of combustion, chemical kinetics and emissions formation and introduction to computational combustion modelling. Combustor design addresses the interrelationship between operational requirements and combustion fundamentals.
MECH 5401 [0.5 credit] (MCG 5341)
Turbomachinery
Types of machines. Similarity: performance parameters; characteristics; cavitation. Velocity triangles. Euler equation: impulse and reaction. Radial pumps and compressors: analysis, design and operation. Axial pumps and compressors: cascade and blade-element methods; staging; off-design performance; stall and surge. Axial turbines. Current design practice.
Turbomachinery
Types of machines. Similarity: performance parameters; characteristics; cavitation. Velocity triangles. Euler equation: impulse and reaction. Radial pumps and compressors: analysis, design and operation. Axial pumps and compressors: cascade and blade-element methods; staging; off-design performance; stall and surge. Axial turbines. Current design practice.
MECH 5402 [0.5 credit] (MCG 5342)
Gas Turbines
Interrelationship among thermodynamic, aerodynamic, and mechanical design. Ideal and real cycle calculations. Cycle optimization; turbo-shaft, turbojet, turbofan. Component performance. Off-design performance; matching of compressor, turbine, nozzle. Twin-spool matching.
Gas Turbines
Interrelationship among thermodynamic, aerodynamic, and mechanical design. Ideal and real cycle calculations. Cycle optimization; turbo-shaft, turbojet, turbofan. Component performance. Off-design performance; matching of compressor, turbine, nozzle. Twin-spool matching.
MECH 5403 [0.5 credit] (MCG 5343)
Advanced Thermodynamics
The course covers three major topics: review of fundamentals from a consistent viewpoint, properties and equations of state, and applications and special topics. The third topic includes an introduction to statistical thermodynamics.
Advanced Thermodynamics
The course covers three major topics: review of fundamentals from a consistent viewpoint, properties and equations of state, and applications and special topics. The third topic includes an introduction to statistical thermodynamics.
MECH 5407 [0.5 credit] (MCG 5347)
Conductive and Radiative Heat Transfer
Analytical, numerical and analog solutions to steady-state and transient conduction heat transfer in multi-dimensional systems. Radiative heat exchange between black, grey, non-grey diffusive and specular surfaces, including effects of athermanous media.
Conductive and Radiative Heat Transfer
Analytical, numerical and analog solutions to steady-state and transient conduction heat transfer in multi-dimensional systems. Radiative heat exchange between black, grey, non-grey diffusive and specular surfaces, including effects of athermanous media.
Also listed as MAAJ 5457.
MECH 5408 [0.5 credit] (MCG 5348)
Convective Heat and Mass Transfer
Analogies between heat, mass and momentum transfer. Forced and free convection relations for laminar and turbulent flows analytically developed where possible and otherwise deduced from experimental results, for simple shapes and in heat exchangers. Mass transfer theory and applications.
Convective Heat and Mass Transfer
Analogies between heat, mass and momentum transfer. Forced and free convection relations for laminar and turbulent flows analytically developed where possible and otherwise deduced from experimental results, for simple shapes and in heat exchangers. Mass transfer theory and applications.
MECH 5500 [0.5 credit] (MCG 5350)
Advanced Vibration Analysis
General theory of continuous and discrete multi-degree-of-freedom vibrating systems. Emphasis on numerical techniques of solving complex vibrating systems, with selected applications from aerospace, civil, and mechanical engineering.
Advanced Vibration Analysis
General theory of continuous and discrete multi-degree-of-freedom vibrating systems. Emphasis on numerical techniques of solving complex vibrating systems, with selected applications from aerospace, civil, and mechanical engineering.
MECH 5501 [0.5 credit] (MCG 5125)
Advanced Dynamics
Developing and applying the governing equations of motion for discrete and continuous mechanical systems. Includes Newton-Euler and Lagrangian formulations; classical and finite element approaches for continuous systems; and linear stability, frequency response, and propagation solution methods.
Advanced Dynamics
Developing and applying the governing equations of motion for discrete and continuous mechanical systems. Includes Newton-Euler and Lagrangian formulations; classical and finite element approaches for continuous systems; and linear stability, frequency response, and propagation solution methods.
Includes: Experiential Learning Activity
MECH 5502 [0.5 credit] (MCG 5352)
Optimal Control Systems
Review of transfer function and state-space system descriptions. Elements of the optimal control problem. Variational calculus. Optimal state feedback control. Riccati equations. Optimal observers and Kalman-Bucy Filters. Extension to discrete time systems including an introduction to dynamic programming. Practical applications are emphasized throughout the course.
Optimal Control Systems
Review of transfer function and state-space system descriptions. Elements of the optimal control problem. Variational calculus. Optimal state feedback control. Riccati equations. Optimal observers and Kalman-Bucy Filters. Extension to discrete time systems including an introduction to dynamic programming. Practical applications are emphasized throughout the course.
MECH 5503 [0.5 credit] (MCG 5353)
Robotics
The history of and introduction to robotics methodology. Robots and manipulators; homogeneous transformation, kinematic equations, solving kinematic equations, differential relationships, motion trajectories, dynamics. Control; feedback control, compliance, servomotors, actuators, external and internal sensors, grippers and vision systems. Microprocessors and their application to robot control. Programming.
Robotics
The history of and introduction to robotics methodology. Robots and manipulators; homogeneous transformation, kinematic equations, solving kinematic equations, differential relationships, motion trajectories, dynamics. Control; feedback control, compliance, servomotors, actuators, external and internal sensors, grippers and vision systems. Microprocessors and their application to robot control. Programming.
MECH 5504 [0.5 credit] (MCG 5354)
Guidance, Navigation and Control
Guidance system classification, flight control systems, targeting, target tracking, sensing. Modern multivariable control analysis; design requirements, sensitivity, robustness, perturbations, performance analysis. Modern filtering and estimation techniques. Terrestrial navigation; tactical air navigation (TACAN), star trackers Guidance mission and performance. Aircraft, missile and spacecraft guidance and control.
Guidance, Navigation and Control
Guidance system classification, flight control systems, targeting, target tracking, sensing. Modern multivariable control analysis; design requirements, sensitivity, robustness, perturbations, performance analysis. Modern filtering and estimation techniques. Terrestrial navigation; tactical air navigation (TACAN), star trackers Guidance mission and performance. Aircraft, missile and spacecraft guidance and control.
MECH 5505 [0.5 credit] (MCG 5355)
Stability Theory and Applications
Fundamental concepts and characteristics of modern stability definitions. Sensitivity and variational equations; linear variational equations; phase space analysis; Lyapunov's direct method. Autonomous and nonautonomous systems; stability in first approximation; the effect of force type on stability; frequency method.
Stability Theory and Applications
Fundamental concepts and characteristics of modern stability definitions. Sensitivity and variational equations; linear variational equations; phase space analysis; Lyapunov's direct method. Autonomous and nonautonomous systems; stability in first approximation; the effect of force type on stability; frequency method.
Also listed as MAAJ 5555.
MECH 5506 [0.5 credit] (MCG 5356)
Neuro and Fuzzy Control
Knowledge-based controllers. Fuzzy control: mathematics, relations, operations, approximate reasoning. Fuzzy knowledge base control and structure. Fuzzification, inference engine, defuzzification. Nonlinear, adaptive fuzzy control systems. Stability, Neuro-control: processing, learning. Adaptation of artificial neural systems: associative memories, algorithms, applications, and network implementation. Neurofuzzy systems: industrial applications.
Neuro and Fuzzy Control
Knowledge-based controllers. Fuzzy control: mathematics, relations, operations, approximate reasoning. Fuzzy knowledge base control and structure. Fuzzification, inference engine, defuzzification. Nonlinear, adaptive fuzzy control systems. Stability, Neuro-control: processing, learning. Adaptation of artificial neural systems: associative memories, algorithms, applications, and network implementation. Neurofuzzy systems: industrial applications.
Precludes additional credit for EACJ 5709 (ELG 5196).
MECH 5507 [0.5 credit] (MCG 5124)
Advanced Kinematics
Algebraic-geometry applications: kinematic calibration of serial and in-parallel robots; kinematic synthesis of planar, spherical, spatial mechanisms. Various DH-parametrisations, Jacobian formulations. Topics in: projective geometry; Cayley-Klein geometries; Plücker line coordinates; Gröbner bases; Grassmannians; kinematic mapping; Burmester theory. Emphasis on practical applications.
Advanced Kinematics
Algebraic-geometry applications: kinematic calibration of serial and in-parallel robots; kinematic synthesis of planar, spherical, spatial mechanisms. Various DH-parametrisations, Jacobian formulations. Topics in: projective geometry; Cayley-Klein geometries; Plücker line coordinates; Gröbner bases; Grassmannians; kinematic mapping; Burmester theory. Emphasis on practical applications.
MECH 5508 [0.5 credit] (MCG 5326)
System Modelling, Dynamics and Control
The course provides an understanding of system modelling and the connection between energy domains. Within the temporal and/or frequency domains, system identification techniques and control aspects are explored for discrete and continuous systems along with lumped and distributed parameter models.
System Modelling, Dynamics and Control
The course provides an understanding of system modelling and the connection between energy domains. Within the temporal and/or frequency domains, system identification techniques and control aspects are explored for discrete and continuous systems along with lumped and distributed parameter models.
MECH 5509 [0.5 credit] (MCG 5327)
Nonlinear Systems Analysis & Controls
Introduction to nonlinear systems, stability of periodic solutions and limit cycles. Second-order nonlinear systems. Mathematical foundations for stability analysis, Lyapunov and LaSalle’s methods. Autonomous and non-autonomous systems. Input-Output stability formalisms. Basics of nonlinear control techniques based on Lyapunov methods.
Nonlinear Systems Analysis & Controls
Introduction to nonlinear systems, stability of periodic solutions and limit cycles. Second-order nonlinear systems. Mathematical foundations for stability analysis, Lyapunov and LaSalle’s methods. Autonomous and non-autonomous systems. Input-Output stability formalisms. Basics of nonlinear control techniques based on Lyapunov methods.
MECH 5601 [0.5 credit] (MCG 5361)
Creative Problem Solving and Design
Problem-solving processes and how they can be applied in engineering design. Emphasis on learning methodologies rather than accumulating information. Techniques can be successfully applied in any engineering specialty.
Creative Problem Solving and Design
Problem-solving processes and how they can be applied in engineering design. Emphasis on learning methodologies rather than accumulating information. Techniques can be successfully applied in any engineering specialty.
Also listed as MAAJ 5657.
MECH 5602 [0.5 credit] (AMM 5362)
Failure Prevention (Fracture Mechanics and Fatigue)
Design of engineering structures to ensure against failure due to fatigue or brittle fracture. Nature of fatigue and brittle fracture; selection of suitable material, geometry, and inspection procedures for the load and environmental conditions.
Failure Prevention (Fracture Mechanics and Fatigue)
Design of engineering structures to ensure against failure due to fatigue or brittle fracture. Nature of fatigue and brittle fracture; selection of suitable material, geometry, and inspection procedures for the load and environmental conditions.
Also listed as MAAJ 5652.
MECH 5603 [0.5 credit] (AMM 5381)
Lightweight Structures
Structural behaviour. Fundamentals of basic elasticity. Energy methods of structural analysis. Bending, shear, and torsion of open and closed multicell structures. Bending of plates. Structural idealization and its effects on open and closed sections. Structural stability.
Lightweight Structures
Structural behaviour. Fundamentals of basic elasticity. Energy methods of structural analysis. Bending, shear, and torsion of open and closed multicell structures. Bending of plates. Structural idealization and its effects on open and closed sections. Structural stability.
MECH 5604 [0.5 credit] (AMM 5364)
Computational Metallurgy
Development of microstructure in alloys in solidification processes and post-solidification processing. Nucleation and growth of solid phase. Formation of a dendrite structure, macro and micro segregations. Pore formation in castings. Thermodynamic and kinetics of phase transformations and structure evolution in solid alloys.
Computational Metallurgy
Development of microstructure in alloys in solidification processes and post-solidification processing. Nucleation and growth of solid phase. Formation of a dendrite structure, macro and micro segregations. Pore formation in castings. Thermodynamic and kinetics of phase transformations and structure evolution in solid alloys.
MECH 5605 [0.5 credit] (MCG 5365)
Finite Element Analysis I
An introduction to the finite element methodology, with emphasis on applications to heat transfer, fluid flow and stress analysis. The basic concepts of Galerkin's method, interpolation, numerical integration, and isoparametric elements are taught using simple examples.
Finite Element Analysis I
An introduction to the finite element methodology, with emphasis on applications to heat transfer, fluid flow and stress analysis. The basic concepts of Galerkin's method, interpolation, numerical integration, and isoparametric elements are taught using simple examples.
Also listed as MAAJ 5655.
MECH 5606 [0.5 credit] (MCG 5366)
Finite Element Analysis II
Time marching heat flow problems with linear and nonlinear analysis. Static plasticity. Time-dependent deformation problems; viscoplasticity, viscoelasticity, and dynamic analysis. Isoparametric elements and numerical integration are used throughout.
Finite Element Analysis II
Time marching heat flow problems with linear and nonlinear analysis. Static plasticity. Time-dependent deformation problems; viscoplasticity, viscoelasticity, and dynamic analysis. Isoparametric elements and numerical integration are used throughout.
MECH 5607 [0.5 credit] (MCG 5367)
The Boundary Element Method (BEM)
Integral equations. The BIE for potential theory and for elastostatics in two-dimensions. Boundary elements and numerical integration schemes. Practical applications.
The Boundary Element Method (BEM)
Integral equations. The BIE for potential theory and for elastostatics in two-dimensions. Boundary elements and numerical integration schemes. Practical applications.
MECH 5609 [0.5 credit] (AMM 5123)
Microstructure and Properties of Materials
Essential microstructural features of metals and alloys: crystal structure, dislocations, grain boundaries. The importance of these features in controlling mechanical properties is emphasized. Analytical techniques observing microstructure in metals and other materials: TEM, SEM, electron diffraction, spectrometry.
Microstructure and Properties of Materials
Essential microstructural features of metals and alloys: crystal structure, dislocations, grain boundaries. The importance of these features in controlling mechanical properties is emphasized. Analytical techniques observing microstructure in metals and other materials: TEM, SEM, electron diffraction, spectrometry.
Also listed as MAAJ 5659.
MECH 5700 [0.5 credit] (AMM 5345)
Surfaces and Coatings
Surface characteristics of solid materials and surface degradation/failure mechanisms including wear, fretting, oxidation, corrosion, and erosion are introduced. Coating methods including PVD, CVD, laser, thermal spray and electrochemical deposition are discussed in the context of failure prevention measures.
Surfaces and Coatings
Surface characteristics of solid materials and surface degradation/failure mechanisms including wear, fretting, oxidation, corrosion, and erosion are introduced. Coating methods including PVD, CVD, laser, thermal spray and electrochemical deposition are discussed in the context of failure prevention measures.
Also listed as MAAJ 5750.
MECH 5701 [0.5 credit] (AMM 5369)
Metallic Phases and Transformations
Thermodynamics of crystals, phase diagrams, principles of alloy phases, thermal analysis. Transformation rate and mechanisms. Short and long range diffusional transformations, diffusionless transformations. Phase transformations in engineering systems.
Metallic Phases and Transformations
Thermodynamics of crystals, phase diagrams, principles of alloy phases, thermal analysis. Transformation rate and mechanisms. Short and long range diffusional transformations, diffusionless transformations. Phase transformations in engineering systems.
Also listed as MAAJ 5751.
MECH 5704 [0.5 credit] (AMM 5374)
Integrated Manufacturing Systems (CIMS)
Topics essential to CIMS including computer graphics, geometric modeling, numerically controlled machining, and flexible manufacturing. The fundamental data structures and procedures for computerization of engineering design, analysis and production.
Integrated Manufacturing Systems (CIMS)
Topics essential to CIMS including computer graphics, geometric modeling, numerically controlled machining, and flexible manufacturing. The fundamental data structures and procedures for computerization of engineering design, analysis and production.
Also offered at the undergraduate level, with different requirements, as MECH 4704, for which additional credit is precluded.
MECH 5705 [0.5 credit] (MCG 5375)
CAD/CAM
Computer aided design and manufacturing methodology through hands-on experience and state-of-the-art software. Topics include mathematical representation, solid modeling, drafting, mechanical assembly, mechanism design and CNC machining. CAD data exchange standards, rapid prototyping, concurrent engineering and design for X are also discussed.
CAD/CAM
Computer aided design and manufacturing methodology through hands-on experience and state-of-the-art software. Topics include mathematical representation, solid modeling, drafting, mechanical assembly, mechanism design and CNC machining. CAD data exchange standards, rapid prototyping, concurrent engineering and design for X are also discussed.
MECH 5800 [0.5 credit] (MCG 5480)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Also listed as MAAJ 5850.
MECH 5801 [0.5 credit] (MCG 5489)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5802 [0.5 credit] (MCG 5483)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Also listed as MAAJ 5852.
MECH 5803 [0.5 credit] (MCG 5488)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Also listed as MAAJ 5853.
MECH 5804 [0.5 credit] (MCG 5384)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Also listed as MAAJ 5854.
MECH 5805 [0.5 credit] (MCG 5482)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Also listed as MAAJ 5855.
MECH 5806 [0.5 credit] (MCG 5486)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5807 [0.5 credit] (MCG 5487)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Also listed as MAAJ 5857.
MECH 5808 [0.5 credit] (MCG 5376)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Also listed as MAAJ 5858.
MECH 5809 [0.5 credit] (MCG 5382)
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
Special Topics in Mechanical and Aerospace Engineering
Topic will vary from year to year.
MECH 5906 [0.5 credit]
Directed Studies
Directed Studies
MECH 5908 [1.5 credit] (MCG 5398)
Independent Engineering Study
Students pursuing a master's degree by course work carry out an independent study, analysis, and solution of an engineering problem or design project. The results are given in the form of a written report and presented at a departmental seminar.
Independent Engineering Study
Students pursuing a master's degree by course work carry out an independent study, analysis, and solution of an engineering problem or design project. The results are given in the form of a written report and presented at a departmental seminar.
Includes: Experiential Learning Activity
MECH 5909 [2.5 credits]
M.A.Sc. Thesis
M.A.Sc. Thesis
Includes: Experiential Learning Activity
MECH 6909 [0.0 credit]
Ph.D. Thesis
Ph.D. Thesis
Includes: Experiential Learning Activity
Note: Not all courses listed are offered in a given year. For an up-to-date statement of course offerings for the current session and to determine the term of offering, consult the class schedule at central.carleton.ca.
Summer session: some of the courses listed in this Calendar are offered during the summer. Hours and scheduling for summer session courses will differ significantly from those reported in the fall/winter Calendar. To determine the scheduling and hours for summer session classes, consult the class schedule at central.carleton.ca
Regulations
See the General Regulations section of this Calendar.
Regularly Scheduled Break
For immigration purposes in the programs listed below, the summer term (May to August) is considered a regularly scheduled break approved by the University. Students should resume full-time studies in September.
- M.Eng. Aerospace (coursework and research project pathways only)
- M.Eng. Materials (coursework and research project pathways only)
- M.Eng. Mechanical (coursework and research project pathways only)
Note: a Regularly Scheduled Break as described for immigration purposes does not supersede the requirement for continuous registration in Thesis, Research Essay, or Independent Research Project as described in Section 8.2 of the Graduate General Regulations.
Admission
The normal requirement for admission to the master's program is a bachelor's degree with at least high honours standing in mechanical or aerospace engineering or a related discipline.
Admission
The normal requirement for admission to the Ph.D. program is a master's degree in mechanical or aerospace engineering or a related discipline.
Students who are in the master's program may be admitted to the Ph.D. program if they show outstanding academic performance and demonstrate significant promise for advanced research, upon recommendation of the department.In addition, graduate courses offered by departments in other disciplines may be taken for credit with approval by the department in which the student is registered.